subs

Hello guys,I'm sorry to ask such a simple question but I'm hoping someone can help So pretty much i have two kicker 10" 10cvr104 subs. 4 ohm dvc, 800watt max power, and 400rms. And for an amp, i have a Kenwood monoblock class D KAC-9106D. Max power 2000 watt peak, 1000 watt rms at 2 ohms, and...

I've been looking for a new amp ever since my old Kenwood blew I've got two Pioneer TS-W250R 10" They are SVC 4-ohm each, and I wanted to wire them as a 2-ohm load, and I've been looking at a few different amps. I don't have a lot of money, but I can go up to about $150. I've been looking...

Hi guys, just joined today ! Sorry if this thread has been posted before. I’ve read over a dozen posts about my situation and can’t find a solution, or the their problem was slightly different than mine. What I have : Rockford F. P3001 , And two 10” dtx subs. And a kenwood deck (They came with...

. .Ok. I've made alot of progress in messing with this truck. What I really need to know is, how to specifically wire my subs up to Amp to get a safe and full potential performance. I have a a 400 watt peak power 8" Boss 4 ohm Dual voice coil sub and a 12" Pioneer 4 ohm 800 watt peak power sub...

Item(s) for Sale: (2) TI style 10" baskets new (2) Skar ZVX v1-1.5 motors 3" coils (3) RF P312D4 (original ones) 12"s dual 4 ohm (2) Pioneer Premier TS-W126DVC 12"s dual 4 ohm Item(s) Description/Condition: Baskets are new never been used ZVX motors are used, bottom scratched up, couple...

First I thought maybe T015s and a T1500 amp. That set up would've costed me 3500 and it would've just been a big *** box in my sedan's trunk, likely not what the subwoofers really want or need. I then bought some 12s HDC3s and I sold them to someone else after being convinced the same thing. I...

I have had a Fosgate t2 15 for a while and it hits pretty good. I finally decided to get an upgrade and bought another t2 15 and hooked it up. It hits with the same power as before. I have a RE audio 3000 watt amp. Is this just a power issue? What is the next step to get more bass.

Currently have a 2004 grand cherokee and I have a kicker cx1200.1 amp hooked up to 2 comp r s with a 120 amp alt and a normal battery, have issues with headlights dimming. Just want to get a new amp and subs. Planning on around 3500 rms and would like to know what electrical upgrades you guys...

2 10" HiVi SP-10 subwoofers w/box: Box and speakers were hand me down from my brother and I owe a mechanic money for an alternator. I ran it on a HiFonics 1000watt Zeus Amp and it kept up pretty well with hip/hop etc. playlist, almost killed some battery because of the long sustained notes...

I resentlt just got a custom ported dual 8" subwoofer box and was expecting my bass in my car to be very good. After installing them and turing on they were very very quiet like i could barly tell they were on. After adjusting setting and such i got them up a little bit to were i can hear them...

Hello I am new here and was hoping someone could help me with box plans. I need a 1 Cu Ft box with a port diameter of 3 in and 7 inch in length. its for a 10in

My local swap meet guy is trying to sell me 2 15 digital design 715 for 250 each first question is this a good deal , I kno dd is a great comp brand are there better woofers in this class for less and what amp would deliver the most power consistently (rms) my budget is pretty shoe string not...

My amp (900w RMS) is being powered by a 750w computer power supply. When I turn it up, it acts just like I have it hooked up to a battery. Nothing shuts off, it doesn't sound quite, and there isn't any distortion. Is it bad on the amp to turn it up to the correct voltage (square root of...

So i'm getting my car tomorrow and i'm buying subs. I want to do 3 12in subs, in a ported box. But i'm not sure what subs i should get. I am on a budget, but need a lot of bass. So i need to know a good combo of Amp and Subs.

Hi, I had recently installed myself 2 10 inch Rockford fosgate subwoofers in one enclosed box with a 600 peak RMS Watts and a volfenhag amp with 800W peak. I used 8 gauge kicker wiring for the installation. Everything worked perfectly for 2 weeks and I decided to get new 6 1/2 inch 300W speakers...

So, I've never really had anything worth mentioning in the trunk/cargo area of any vehicle that I've owned. With that being said, I've got some cash to spend and I want to do this right. I have a '99 Tahoe and all of the speakers inside have been replaced with Fosgate components. Now I need the...

I'm planning my build in the upcoming warmer weather in the spring /summer I already have my dc 5k and will be getting the electrical to run it at .5 I need suggestions on what kind and how many subs I should get. I've got about 30cu ft to play with. Would like maybe a couple 18s but am open to...

Hello, sorry if my explanation is long but I want to just provide all the information up front. I originally had 2 12" Kicker Comp R subs installed professionally on a Kicker cv600.1. No electrical issues at this point, but I later decided I wanted to try out some Alpine Type R's. So, I had...

I just got 2 jl 12w0 8s in a box and a quantum audio qca3500d amp. My friend said the amp is only 500 watts but it says 3500 at 1 ohm. Is this okay to hook up? Will it blow my subs?

I have a 2007 Honda Civic SI which has a factory radio wired to a factory amplifier powering an 8" factory subwoofer along with the 4 other door speakers and 2 tweeters. I have a 1700 watt rms Hifonics Brutus Class D monoblock amp along with 2 12" Kicker subwoofers powered at 800 watt rms each...

so a while back i bought a whole system and wired it myself and it worked great. recently the mono amp and sub went due do being wet. bought the same sub and a different, but similar mono amp and wired it exactly how it was and it worked good. next day started my car and realized both amps were...

I haven't had a system in a little over 2 years, but what I did have was an Fi ssd12 fully loaded off a soundstream rub1600 in 3 cubes @ 35hz. I was very happy with this and don't want anything worse (less loud or worse sq) Also had 2 audiopipe txxapa12 blues off an ap1500 in a ****** prefab...

Can my 2 subs , HDC3 15s (copper coils) be run safely at 1 ohm off a 3500? Given electrical is sufficient and gains are set properly.

So I was replacing my aux cord the other day and when I took out my head unit I noticed I accidentally unplugged the RCA cords that connect from the head unit as well. I plugged back together the RCA cables and put my head unit back together. I noticed that when I was going through my options...

I recently purchased a 350z and I am looking for a whole car audio setup. I have read around but am still not sure what I want to do. I am more concerned with sound quality, but I want it to bump very hard. I have looked into jl, but I'm not decided on anything. I'm open to all opinions and...

I recently purchased a tahoe, so I have more then enough room to jam some speakers/subs in this bad boy. I just need some help deciding what I should put in it and a recommendation of what to push those subs. I would prefer to put 12s in it, but 15-18 would be alright with me as well. I'm...

Hello, I have a few old subs that are in need of new dust caps, but I would like to keep their original logo. Does anybody know of a company that can silk screen on dust caps? Tnx in advance.

I have 2 Alpine Type R 15's powered by a Hifonics Gladiator 2200 watt amp. They were playing great for about a week. They were playing great and I went to show a friend and kept it at about 40/62 volume for a while and all of the sudden it went static and shut off. The amp was still lit up and...

Okay so a few months ago I changed amps from an MTX amp that came with my Dual 12 inch MTX Terminators. I switched to a BOSS R6002 1200 Watt Amp (2 Channel). After installing this amp I noticed that my subs were noticeably quitter, less of a bang and they distort and the amp goes into protection...

Item(s) for Sale: two dual 12 inch subs in a bandpass box and kinetik 800 deep cycle battery Item(s) Description/Condition: hi my name is tom I have two dual 12 inch subs in a bandpass box in good condition the box even lights up blue on the subs and in the reflective box its just the wires...

So Friday I installed my subs, my first setup, into my 06 Mazda 3 Hatch. The setup I have is 2 Alpine Type S 12" Subs (the 2ohm model) which rms at 500w each, an alpine mrx-m110 that has 1100w rms @ 2ohms, a sealed enclosure, and a Pioneer AVH-x2600bt HU. I wired the subs at 2ohms and planned on...

Quick run down: Single Cab truck, custom box for two 10" subs sealed. Amp Audiopipe ASPM1500 1500w Limited space: The last subs had a 5" inch mounting depth which were the limit I think for the box. Budget: $150-200 for two subs Going for mostly sound quality, but wouldn't might some...

Item(s) for Sale: 2 12" SSA GCON, Dual Voice Coil 4 Ohm, 750W RMS each. Item(s) Description/Condition: Hello up for sale I have 2 Sound Solutions Audio GCON-12 Subs. I ordered them in July of 2013 and got them several months later in October. I bumped them for less than 2 months as I took...

Hey guys, so I want to be able to easily adjust the volume on my subs when I get them installed. So I had an idea the to use a bass/gain knob. Now I do not want to use this to ever turn my subs up over what they are tuned and set to. I just want to use this to turn down the volume of them for...

Item(s) for Sale: 2 15 platform 2 fully loaded Item(s) Description/Condition: Brand new still in wrapping one was taken out just to show what it looks like Price: 600 or trade for 2 12s and an amp or anything u have to offer the worst I can say is no Shipping and Miscellaneous Item...

I am looking to buy my first pair of subs, and I would like to get two 12s. For the past few weeks I've been looking and I thought I had decided on on the Alpine type S's sws-12d2, but now I am starting to have some second thoughts. I want subs that are going to be a good mix of sound quality...

Currently I have This box for an older model Sony Xplod and Pioneer which are svc 4-ohm so together they are getting about 600 RMS. I am running a hifonics Glx1400.1D with 4 gauge wiring. I want to get new subs for a better sound quality system and hope to improve the loudness as well. I was...

What amp should I use for my subs? Also how should I wire them. They run 400rms each and are 2 ohms each.

Looking to buy 1 or 2 W3's, or 1 or 2 W6's. Don't need a box or amp, just the subs. Must be a 12" unless you will include a box for anything bigger/smaller than 12". I have $250 to spend. Will go higher depending on what the offer is. If anyone has a W7 who's willing to get rid of it around this...

Im looking into getting my first sub/ speaker setup and I need pointers and advice before I go invest in a system. I know just some basics, like a 4 channel amp means you can run four different speakers/subs on it, splitting the wattage in fourths. Only other sub related thing i know is that...