Hey people I'm looking to buy this head unit for my BMW 1 series and it says it's got a sub RCA output but the diagram doesn't show me one and I was wondering if maybe it's called something else? I'll put the pic of the diagram. Oh also I want the sub RCA just for a single amp/sub setup nothing...
Hopefully, I'm posting in the right area. I purchased 2 Sound Storm Laboratories LOPRO10 10 Inch Powered Subwoofers. Both with 2 RCA inputs L & R . No outputs. I have 1 RCA with 2 cables labeled L & R. I have the RCA plugged in the L channel on 1 sub and the R channel on the 2nd sub. My problem...
Bridged 4 channel memphis viv 400.4 for focal es 165 k fronts. Amp has switch for 2 or 4 I put it on 2 ran rca's from front to front on amp + and - I'm getting mono sound no balance .do I need to go from read Hu to rear amp with rca's for stereo .?
I’ve got a 1500 watt amp and 2 kicker 12” subs that play a loud hum when I turn the car off. This note plays during the time between the engine shutting off and the amp getting cut off. ALSO: I noticed that if I unplug thr RCA from the amp, this does not happen. What might be the issue?
Hi, I've just upgraded my sub, it's a hertz mps 250 s2, I need to change the settings on my audison sr 5.600 so that the sub is getting the full 550 watts, at the moment it's wired up using the rca inputs, on the instructions it has 2 configurations for five channels. 75w x4 +330w x1 at 4 ohms...
Hi
A little noob here. Please help.
I have a question for you. My headunit is the Pioneer MVH-S200DAB.
I have just bought an active subwoofer to put in the car. In my car I have 4 RCA outputs on the back of the radio. 1 front and 1 rear / SUB.
The thing is that I have 4 speakers that run...
Hey all,
I just hooked up a new small JBL 4way channel amp in my trunk to normal aftermarket coaxial front and a set of rear speakers. I'm loving the audio when it's turned up, sounds pretty good, but I get a crazy whistling noise from my back speakers when volume is low (probably high but the...
I have an amp that takes rca from the head unit, however my head unit does not have rca out. I was wondering if i could wire rca cables to the speaker outputs from the harness of the head unit to be plugged into the amp?
So I don’t know why or how but when I plug both rcas into the amp they distort the sub and when I have only one it will play one sub crystal clear and I don’t know what to do from here any help would be appreciated thanks
My head unit has 3 pre amp outputs all used up on the subs, tweeters and midrange, going into a DSP with 4 pre amp outputs, so 1 set of pre amp outputs are free on the DSP, which I would like to use to bandpass my rear backseat speakers.
Can i, using the HU as an amp, use the HU designated rear...
So I have a somewhat crappy aftermarket head unit (Boss 460BRGB) so that if my car is broken into and it is stolen it wont be too bad a hit. Anyways I recently installed a Hifonics Zeus ZXX-1000.4 amp for my 4 kenwood 6x9 speakers. The two door 6x9s are rated at 115w rms at 4 ohm and the rear...
Warning this question will probably sound extremely dumb.
So in short, if I have an OEM headunit and i use a line level converter to output to rca and then used a rca to aux 3.5mm adapter. Could I use that output for an aux input on another headunit? Thanks.
I'm going to try to give as much detail as possible so you can help me figure this out. I was given a Kenwood 350 watt max, 2 channel amp from a coworker. I have an upgraded factory sound system in my car that includes a 6 channel amplifier and a 10" Pioneer sub. I also have an aftermarket...
Hi everyone. Although I've used this forum for years, this is the first time I've ever posted. I've been messing with car audio for 10+ years, but ironically this was my first Bose integration.
Thanks in advance for reading, and I have tried to be as detailed as possible in my description...
So I was taking stuff out of my car the other day and managed to snag my RCAs which weren't tucked well and pull them out unknowingly and slammed my car door on them. They are shorter so I've got 2 sets of RCAs connected together and this happened at the connection.
so basically right from...
So I was replacing my aux cord the other day and when I took out my head unit I noticed I accidentally unplugged the RCA cords that connect from the head unit as well. I plugged back together the RCA cables and put my head unit back together. I noticed that when I was going through my options...
Hi,
I have only 1 RCA pre-out in my Pioneer HU and I need to connect it to a 4-ch amp. I have used Y-splitters because according to my logic it did not pose much risk to losing the quality of signal as compared to a Line Output Converter (LOC) or using High level inputs.
The Y-Splitters are...
Item(s) for Sale:
x3 Krystal 2m 2 channels Brand New
x1 Krystal 6m 2 channel Brand New
x1 Karma 2m 2 channel Brand New
x2 MKS 6m 2 channel USED but in good shape (not pictured)
Item(s) Description/Condition:
See above!!
Price:
$75 plus shipping FIRM. NO TRADES. KILLER PRICE/WILL NOT...
Hey everyone
So I have my sub amplifier under my passenger seat and I am using the Knukonceptz bassik RCA cables running from my amp to my HU. About a month ago I started noticing that my subs weren't hitting as loud as they had been and should be hitting. I searched around and located the...
Im working on putting a new sound system in may car, Its a 2010 impreza sport. What would the adapter be I need to get RCAs and keep all 4 channels? I found some but they only splice into 1 speaker, so that would just send that channel to the amp and thus so all the other speakers giving me a...
Howdy,
I'm at the point where i'm clueless on what my problem is. Let's start at the beginning. I recently bought a second amp for my front and rear fill and have for the past 2 weeks have been happily enjoying my quaint system. Today after hitting a couple balls on the range, I turned on my...
Hello everyone! My stereo was picking up heavy amounts of engine noise/whine, I moved the ground location for my headunit (from harness to chassis) and my amplifier ground as well. Neither helped. Then a thought struck me; maybe my $1 RCA's might be picking up this noise! I held my headunit away...
i need 2 nice quality 12 ft rca's dont really mind if they are used or not as long as they are in good condition + quality...
i need a 3 way fuse block (3 in- 3 out) or 1 in 3 out... 0-1 guage in to 0-4 guage out
possibly a ground loop (idk much about them i need some instruction)
possible a...
Will clipping from the head unit to the amp pose and issue with my amps failing or would it just damage my subwoofers? I was looking on some smd forums as well as a vid, and it seems like it might be the issue causing my amps to go out on me Rca wise.
Ok, so ive recently installed a daily driver into my buick lasabre.....pretty much all knock off stuff yes i know im being shunned right now. Since installing my boss phantom 5000 watt....which did suprise me as to what it can do to two 15 inch cvr's ive been having issues with having to put new...
Hi all. Tokai LAR-5301 DVD player + old Panasonic M654 amplifier. No sound. Thought initially that the amp is to blame (bought it 2nd hand from a flee market at ~20$), but then measured that the rca line-out gave nothing out, zero voltages, while a song was playing. Shouldn't there be at least...
im getting bad feed back in my subs switched my rcas and everything.
i no its not my amp i ran rcas from a buddies truck and everyhting was
perfect no feedback but i hook up mine and have bad feedback. my rcas
are not colse to any other wires whats the deal??
Hey, I have a clarion touchscreen deck and a 90W rms X4 4 channel amp running my JL audio C2 speakers. I understand that I am overpowering my speakers a bit but I don't really think that affects anything that I am having issues with. So first, when I turn the deck on there is a staticy sound...
Item(s) for Sale: 1 set of Knukonceptz Krystal Kable RCAs 1 meter (39") about 3 feet 3 inches. They are black or grey I dunno Knu calls it "smoke"
Item(s) Description/Condition: Practically brand new. I think I only used them around 6 months or so. I just used them to connect my Epicenter to...
I have lots of Monster Cable stuff for sale. Will consider trades as well.
I am looking for a 5 channel amp, or a 4 channel and 1 monoblock (good quality) Let me know what you got!! I am open to other items as well for trade, just hit me up.
200 Series amp hook up kits used to hook up your...