enclosure

@Buck If I had a truck and wanted to do a 6th order blow through with 4 - 12" subs would it be smarter to have the ports from the enclosures right where the port for the blow through would be? I have seen a couple of 6th order blow through designs for a truck and every one has the ports coming...

Good day, I am thinking about buying the Pioneer TS-M801PRO PRO Series 8". I have been searching and unable to find the ideal enclosure size for them. Has anyone had experience with these or knows the box volume required? Thanks.

I have two 12-inch subs in sealed enclosures. Can I add Port tubes? What would be the best location? Will it increase the bass performance? Thanks.

Anyone know of any good flat packs or boxes made to spec for the Sundown M 12's or, 15's ?

I have the skar RP 2000.1, mechman 250 alt, big 3 , all zero gauge, Kenwood excelon kmm-x705 , I wanna get the D4s pre fab curve port box for 2 12s . I was thinking about the SA v2 d4s or SA classics ? Any suggestions thank.s

Hello All!: Not exactly sure if this is the correct area to post this but here goes. I have a new to me ‘22 Ram Crew Cab. I know there are a few choices out there for underseat enclosures. Problems are: Cost, I do not need a competition JL Loaded enclosure for the tune of $2-3k. On the other...

This is designed to go under the seat of a 2015-2023 Chevrolet Colorado Crew Cab Sub is a Kicker CWRT dual 4ohm 8 $200 shipped

Hi, my new 24 expedition xlt is arriving this weekend and I’m starting to grab my equipment. I’m still trying to decide on my sub. The factory sub enclosure is not totally perceived as terrible and can be slightly modified to take a slightly beefier. The jl stealth is dope But I don’t want a jl...

I have been out of the game for about 10 years. I have been driving a company car for the past couple of years, and I’m finally about to get a personal car again. Doing research again, and boy has things changed since my last system! Lots of new brands I don’t recognize , and a lot of brands I...

Good evening. So I bought this thing and thought to my self oh hell yeah, bass! Well I was wrong. It takes up way too much room in the trunk so I put it in the back seat. Is that wrong? If so what’s a good kind of bass that’s small enough to go BOOM!, yet small enough to hide well and still...

So I currently have 2 enclosure blueprints that im undecided which one to go with. They are for 2 18s Adire Audio Kh3001 and are gonna be powered by a taramps md8000.1. Ones is a conventional sub up port back and the other is a c-pillar 6th order. Will be going in a 2003 GMC Yukon.

I'm looking to build an enclosure for my 12 in. Subwoofer for home use. I'm not sure how to go about the build but I do know I want the enclosure to be tuned to 20 Hz. Can I get some help and I'm willing to give as much info as necessary, thank you

Just received my Alpine R2-W12D4, but I have the opportunity to get another for a steal. Putting a 4 cubic ft net box in my trunk is possible but may look slightly out of place and very heavy. But if the difference is worth it, I would consider it. Im currently mocking a box up with cardboard to...

I have a 15 orion hccasplx 15 and for power i have a tarramps 12000.1 at 0.5 ohms i just want a slot ported box but can anyone help me figure out the perfect cubic ft for enclosure and the size of port. I want it tunned to 38 hrz

Recently I've been looking to upgrade from my dual 10" Skar SDR's. Knowing what I know now I feel the need to upgrade. I really am set on 12" subs. However trying to decide whether I can get away with building a proper custom enclousre for a single American Bass XR 12" and notice big enough...

Im 50/50 with deciding between two Dayton 12"s in a custom sealed box fitted for my trunk. Or the same 12" Daytons in a custom built ported box that I'd make. I'm really attracted to the benefits of a sealed box. I prioritize quality, ability to play low, depth of the bass, but I also like to...

I currently have 2 Skar SDR 10” powered on 1200watts in their ported box (loaded enclosure package). I’ve been pretty happy with the way they sound, how loud they get and how low they go. They literally flex my roof. However after about a year, recently I’ve been looking into upgrading to a...

Built a small box for an 8" sub. Suppose to be ported but the port size in the manual suggests 3.5in 7in length for 52hrtz. Online calculators are very different. Which should I use? Speaker 8in BOSS cxx8 300w rms 600w max Ported Box cu ft: .53 as per manual Manual states port size at 3.5in...

I have 2 custom 18” Subs that are rated at 3500rms with 4” voice coils, big roll cone. I have them on a taramps md8000, 96ah lithium, dual alternator with its own 300amp alternator just for bass. Installed in a 2003 Yukon Denali. My current box came apart from either poorly built or too much...

Hey asking for a buddy since it's getting colder outside here and works late so lack of light, but who all makes glue and screw sub boxes? The sub is a d4s Dvx 12 so needs 2.5cf. I looked at gp audio but the biggest they offer is 2.25cf.

Addressing a "Featured thread" recently /w/ manufacturer recommendations of 2.5ft3 net... If I had to install one of these in my ride I'd do something like this... Low tuned /w/ low delay. Considering the boom box the manufacturer listed as recommended I have to submit this as a improved design...

My role in this build is only a supporting one enclosure designing, knowing the quality and attention that will sweated into this before it is finalized I asked permission to be a fly on the wall and share. This was done for an extremely talented fabricator, installer, gearhead etc... that...

2009 Honda Accord 2x Fi Xv4-D1 12" 1x SD SAE-3000.1D Electricals Are Good To Go Rear Seat opening to the cabin is only 30(W)x14"(H). Can fit, I believe, another 4-5"(W) max in the trunk against the rear seat(Front Firing) Can't for the life of me figure out if I'd REALISTICALLY be able to...

Not looking for an extreme system, just want something somewhat impressive. Not many options out there for sub enclosures for the new 24 redesigned tacoma. Enclosure behind the seat is nolonger really an option, limited space, seatbelts, power window motor assy, etc... So under the rear seat is...

Merp

Hello everyone, I built the manufacturer recommended ported box for the JL 12W6 (Ported box specs for 12W6) and when I took my system for tuning, I was told the port was too narrow (1.75 inch wide) and the speaker was working way too hard - Image of width of port. The expert demonstrated his...

What is a Sniper Box?

Merp

Hi Everyone! I'm new here. this is my first post here but I've been active on audiokarma for years which is a hifi audio forum. My name is nick and im a 25 year old broke college student and I'm getting my degree in mechanical engineering and I do audio engineering as a hobby. given the fact...

Merp

Merp

Merp

Merp

I will strive to add at least 1 daily but need feedback on what users on this board would like to see. Its slightly tedious for me to put these designs up as my designs are not organized worth a crap. Some are old and have no cutsheets while some involve something like 20 mechanical drawings...

Merp

Merp

Merp

Tryna find a sealed box for a Stereo Integrity HT-18. O ly one I can find that would be suitable is the Dayton Audio knock down box. But I don't really have the space or tools to put that together. Anyone know of any sturdy sealed 18 boxes for like $250 or less shipped? Thanks in advance

Hey what's a decent 12" l7 box on Amazon? I know prefab is not ideal but it's a temp setup and I got a lot of Amazon gift cards.

I’m looking to buy one and I have a box w/a FI 15 Ssd4 v3 d2 that almost meet the SA specs (4.12 after displacement). If I invert the sub, I should be close. I’m possibly going to redesign my box out of new material and when running WinSid, I couldn’t find the xmax on SA’s website. Im not the...