Speaker Buzz After Installing Amplifier

[audiobaun 5,000+ posts]

How old is that HU/Radio? Did you buy it New or Refurb.? Or Used?

 

[audiobaun 5,000+ posts]

Have you tried the Firm Ware update yet??????????

 

[EmpiricalApe]

How old is that HU/Radio? Did you buy it New or Refurb.? Or Used?

I've only had the headunit for a couple months. I bought it new from cruthfield.

 

[EmpiricalApe]

Have you tried the Firm Ware update yet??????????

I have not. I don't have access to a computer at the moment.

 

[Jimi77 Premium Member]

I'm using cruthfield brand 4 ch rca cables, they seem pretty high quality, also, does the same thing with a different pair of rcas ran outside the car. I've pulled it out almost every time I've messed with it, moved it around, moved the wires around. No change.

I hope you have their cheap cables, which are shielded. There is a tendency with RCAs to go unshielded with their higher end cables, which of course is bad juju.

 

[Jimi77 Premium Member]

I'd try some shielded RCAs and ground loop isolator.

 

[JohnPD]

I'd try some shielded RCAs and ground loop isolator.

I second the ground loop isolator, they're cheap and easy as it comes to install.

 

[EmpiricalApe]

I hope you have their cheap cables, which are shielded. There is a tendency with RCAs to go unshielded with their higher end cables, which of course is bad juju.

these are the rcas I'm using from them. I don't see why they wouldn't be shielded.

 

[EmpiricalApe]

I'd try some shielded RCAs and ground loop isolator.

does a ground loop isolator just go on the Amos ground wire, or is it more to it than that?

 

[Jimi77 Premium Member]

these are the rcas I'm using from them. I don't see why they wouldn't be shielded.

The description doesn't say they're shielded. The description of the lower end cables says they're shielded. Here's a little info on why shielded is superior to unshielded.

installer.com

the OS for installer networks

www.installer.com

 

[Jimi77 Premium Member]

does a ground loop isolator just go on the Amos ground wire, or is it more to it than that?

installer.com

the OS for installer networks

www.installer.com

 

[EmpiricalApe]

installer.com

the OS for installer networks

www.installer.com

so I'd need a 4 channel, but to be clear, it just goes between the rca ends and the amp rca ports, correct?

 

[JohnPD]

so I'd need a 4 channel, but to be clear, it just goes between the rca ends and the amp rca ports, correct?

Just put it on the rca cables at the amp. If it's a 4 channel amp use two of them, one for the front left and right, one for the rear left and right.

 

[Jimi77 Premium Member]

so I'd need a 4 channel, but to be clear, it just goes between the rca ends and the amp rca ports, correct?

Goes between the HU and amp. You'll need 2 of them.

 

[EmpiricalApe]

Goes between the HU and amp. You'll need 2 of them.

just exchanged the stereo for another unit after checking everything. I still have the same issue. What else do you think it could be? If I'm using an external amp, I can just use the power and ground in the stereos harness right? to hopefully eliminate some interference.