I asked that same question....prolly a dumb question but what is pink, white, and brown noise?
Where was your head unit volume set at?I have a hifonics bx1605d amp and I used a dmm to set my gains. The amp is rated at 1600 watts at 1 ohm. Which I used the formula and figured that the amp should be set to 40 volts.
I used a -6 db 50 hz tone and slowly turned the gain up. Well I ended up turning the gain all the way up and it only hit 35 volts. After that I tried turning up the bass boost to see if it would go up and it did. It went up to 40 volts pretty quickly. But I turned the bass boost off because I dont really like it that much.
What is wrong?
raise it to 30 or 35 and you'll see more voltage, better yet put your head unit on 3/4 volume then set the gain to the desired voltage, that's what i do25/50 the max i usually play it at.
around 56 volts i believe.could someone tell me roughly what voltage im looking for....800 watts @ 2 ohms?
thank you in advance....i was guessing 40volts