SOLD DIYMA 12" Sub + Custom Enclosure

There's no need to act like retards. I've probably owned and installed more subs than most people on this forum so don't take my low post count for granted. The reason powerhandling increases as enclosure size increases is specific to this sub in particular: the cone has a problem with higher power in very small, sealed enclosures. The pressure present in such small enclosures causes the (relatively thin) cone to buckle under the pressure. So where you can run the sub in a 1.5 cubic foot sealed enclosure with 800w rms with no problems, it is not advised to run it in a .7 cubic foot sealed enclosure at 800w rms due to the cone issue. The sub's powerhandling can therefore be increased as enclosure size increases, as long as the enclosure size and power remain reasonable based on suggested setups (and t/s parameters).
you my friend...are a moron...try craigslist nobody here is stupid so gtfo

 
Whine, whine whine, b-itch, b-itch, b-itch, moan, moan moan

Is crying like a bunch of little ******* a prerequisite to maintaining a membership on the forum? Some of you guys should consider stepping outside and getting some fresh air from time to time. It's okay to step out of the fortress you've built in your mom's basement and talk to a girl once in awhile. //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 
you my friend...are a moron...try craigslist nobody here is stupid so gtfo
Not all subs are made equally you powertool. Most subs have weak components in one area or another either to make them desirable for certain applications or to cut down on production costs. Let's not get into the mechanics of how subwoofers work because I'll make you feel pretty badly when it's all said and done.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
459
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
12
487
What is your budget? With being exposed to Rain.. I would recommend looking at a marine grade SAS Bazooka for the sub stage
3
595
Don't forget Hoffman's Iron Law. You can have 2 of the 3: low end, efficiency/sensitivity or small enclosure size...
4
726

About this thread

malmeid2

10+ year member
Junior Member
Thread starter
malmeid2
Joined
Location
Ft. Laud, FL
Start date
Participants
Who Replied
Replies
33
Views
3,217
Last reply date
Last reply from
malmeid2
Buick Amp Connector.JPG

maylar

    Jun 2, 2024
  • 0
  • 0
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0

New threads

Top