15in sub box

[SpedBoy 10+ year member]

will the front of that be big enough for a 15, 30x14.5 casue i know cutout is 14, would help if i double baffle already got it all cut out, thanks

Click to read more...

 

[pro-rabbit 5,000+ posts]

what 15" most cutouts are 14 1/16-14 3/16 and outer is 15.5-15.75

 

[09civic 5,000+ posts]

this sounds like op accidently made a thread instead of a pm lol

 

[SpedBoy 10+ year member]

what 15" most cutouts are 14 1/16-14 3/16 and outer is 15.5-15.75

dc audio lvl 3

 

[plugitin 5,000+ posts]

thats a 14 inch cut out

 

[09civic 5,000+ posts]

do you already have the dc op?

 

[SpedBoy 10+ year member]

do you already have the dc op?

yes already have dc, already got box all cut up, i hope it fits, casue its only 14.5 and cutout 14

 

[pro-rabbit 5,000+ posts]

just angle the box a little...then all will be ok

 

[pro-rabbit 5,000+ posts]

yes already have dc, already got box all cut up, i hope it fits, casue its only 14.5 and cutout 14

Your sub will over hang on the box

 

[SpedBoy 10+ year member]

Your sub will over hang on the box

that gonna matter, on the picture is shows for a 15

Imageshack - 295cubes34hz3625sqin2dd.png

 

[pro-rabbit 5,000+ posts]

that gonna matter, on the picture is shows for a 15Imageshack - 295cubes34hz3625sqin2dd.png

Well that is a huge difference from 14.5 tall haha....That will work fine.

 

[SpedBoy 10+ year member]

Well that is a huge difference from 14.5 tall haha....That will work fine.

ok haha, sweet, i hope works out good the box i bought the lvl 3 was so poorly built, shims, nailed, glue and chuak, box for my type r turned out good thanks for your help

 

[pro-rabbit 5,000+ posts]

ok haha, sweet, i hope works out good the box i bought the lvl 3 was so poorly built, shims, nailed, glue and chuak, box for my type r turned out good thanks for your help

Just be sure to use tight-bond II and pre-drill your wholes. Should be good to go..be careful when you mount it though. If you didn't a good job putting it together and your lip of the sub puts a screw on the top/bottom in between the wood it will split and could let the wood pull away from each other.

 

[SpedBoy 10+ year member]

Just be sure to use tight-bond II and pre-drill your wholes. Should be good to go..be careful when you mount it though. If you didn't a good job putting it together and your lip of the sub puts a screw on the top/bottom in between the wood it will split and could let the wood pull away from each other.

yep, i predrilled last time, got wood glue and then chuaked it the next day, thing i dont understand is how do i get the box and ports perfect right angles, casue my last box i had touble getting everything 90 degrees

 

[pro-rabbit 5,000+ posts]

use clamps and a good 90 degree L for assembly.