gwaan83
Junior Member
They are not that old and I have a cable thats have the aux end and the rca end.So I plugg it into the amp and it plays fine so it's gotta be something else bisides the amps
I would say that is definitely a signal issue. I know on some decks (mainly pioneer) it even helps to wrap bare wire around the output rca's then to a screw on the deck itself. I'm thinking you have a bad ground. Try tracing your factory ground from your dash that you tapped into. That may be the problemThanks for the replys.I'll try it out. Where would I add the extra ground? I never heard of that before. Do I run the wire from the ground that's already there?