Everyone keeps telling you that unless you find more space or power or both it'll be a lateral move or downgrade.
Here I did a 3 ft3 net for that 9512 tuned at 32hz... it's about as big as I'd go (realistically I COULD go bigger but 3ft3 is pretty big for a single 12 and it's 4.4ft3 gross) and it's got good output man... but as you see below those JL10w6's (yellow) on your power in your enclosure (if it's actually 3ft3 net?) look a bit louder to me.
So once again here it is... to noticeably increase... increase cone area significantly, add pretty much a doubling of power or .... both if you want to get louder for real.
Almost doubling power, redoing my enclosure and adding 2 more batteries and alt/wire took me to 147ish daily from 144 with 2 12's. And it was a HUGE difference with the lower tune... went from a 32hz tune to 30hz with the added power.
There's no magic solution man... The 12 looks to be less to me
Here I did a 3 ft3 net for that 9512 tuned at 32hz... it's about as big as I'd go (realistically I COULD go bigger but 3ft3 is pretty big for a single 12 and it's 4.4ft3 gross) and it's got good output man... but as you see below those JL10w6's (yellow) on your power in your enclosure (if it's actually 3ft3 net?) look a bit louder to me.
So once again here it is... to noticeably increase... increase cone area significantly, add pretty much a doubling of power or .... both if you want to get louder for real.
Almost doubling power, redoing my enclosure and adding 2 more batteries and alt/wire took me to 147ish daily from 144 with 2 12's. And it was a HUGE difference with the lower tune... went from a 32hz tune to 30hz with the added power.
There's no magic solution man... The 12 looks to be less to me
Last edited by a moderator: