bigblank69 10+ year member
CarAudio.com Elite
Ok, curious on what your opinions on box rise and minimum impedance of an amp. I'm redoing my audio system of my boat, and I THOUGHT I had bought a Dual 4 ohm Gen 1 FU750, and apparently that's not the case as I measured it as a Dual 2 ohm today on my new Multi. Normally not a problem, but I bought a Kicker KXM1200 to run it off when I thought it was a dual 4, and that amp is 2 ohm stable.
I have had this set up running together before in my bench test area, and the minimum impedance I ever got down with the box rise was 1.8ohms. I'm thinking I'm going to be ok running this, as I had this this set up running before (Granted for short periods of time, and never got overly warm).
Anyone have any differing opinions?
I have had this set up running together before in my bench test area, and the minimum impedance I ever got down with the box rise was 1.8ohms. I'm thinking I'm going to be ok running this, as I had this this set up running before (Granted for short periods of time, and never got overly warm).
Anyone have any differing opinions?