Setting amp freq when using external crossover

[Theride 10+ year member]

i have an AQ90X4 amp which is active capable. However, I purchased a miniDSP 2X4 to try different things. My issue is, I am not sure how to set the amp.

should I set it to FULL? HPF? when I set it to full, it seems its reproducing too much bass, especially the tweeters. What freq should it be if I flip it to HPF? Since im using an external crossover, should I still set it to switch to 10X or leave it on 1x? if i set it to 10x, wouldnt that be like setting the crossover points TWICE? once on the minidsp and on the amp....

basically, im not sure how to set the amp since im using an external crossover and not the onboard crossover for the active set up.

Click to read more...

 

[maylar 10+ year member]

How about links to your equipment?

 

[Theride 10+ year member]

How about links to your equipment?

I think the amp has been discontinued, but its audioque 90x4.

here is a link of the amp that someone was selling. http://www.caraudio.com/forums/amplifier-classifieds/533285-audioque-90x4-original-box-manuals-receipt-etc.html

Minidsp 2x4 miniDSP 2x4 | miniDSP

 

[maylar 10+ year member]

You need to know the crossover frequencies for your speakers. Seems like the DSP has all the functions you need so I'd be setting the amp to full range.