Del sol Sub box

  • 5
    Participant count
  • Participant list

not_loud_enough
10+ year member

Junior Member
Hey guys.

So i took some measurements to put a ported sub woofer box behind the seats in the Del sol. i stripped everything out and theres actually alot of room to put a nice box for my Fi 12.

Width up to 39"

Top depth 8"

Bottom depth 11.5"

Height 17"

i used re cacluator to get...

1. 2.5 cubic feet (2.3 after sub displacment)

2. tuned to 31hz

Does everything look good?

Should i make a slot port or use port tubes?? what size should the width of the port be?

subbox.jpg


P3260461.jpg
[/img]

 
RE box calc is way wrong, i once designed a box to be tuned to 29hz and when you actually compute the tuning it comes out to more like 34

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
433
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
12
451
What is your budget? With being exposed to Rain.. I would recommend looking at a marine grade SAS Bazooka for the sub stage
3
565
Don't forget Hoffman's Iron Law. You can have 2 of the 3: low end, efficiency/sensitivity or small enclosure size...
4
691

About this thread

not_loud_enough

10+ year member
Junior Member
Thread starter
not_loud_enough
Joined
Location
West Milford, NJ
Start date
Participants
Who Replied
Replies
7
Views
5,081
Last reply date
Last reply from
Imtjnotu
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top