building a ported box

[ructwenty2 10+ year member]

can anyone tell me how to build a ported box

Click to read more...

 

[evo2k3 10+ year member]

jesus....does anyone search at this forum....there are like 12 keyword hits for "port" on the fist page of threads!! not to mention what do you want to know?...here are the steps:

1. build a sealed box with volume within the manufacturers ported specs.

2. decide how long the ports need to be....if they are too long slot port it instead.

3. cut out of the holes, put in the ports, seal, dry, boom!

obviously there is a shitload more to it, but you need to be a little more specific and hella lot less lazy and start searching through the millions of threads about porting.

 

[RangerMan Premium Member]

Originally posted by evo2k3 jesus....does anyone search at this forum....there are like 12 keyword hits for "port" on the fist page of threads!! not to mention what do you want to know?...here are the steps:

1. build a sealed box with volume within the manufacturers ported specs.

2. decide how long the ports need to be....if they are too long slot port it instead.

3. cut out of the holes, put in the ports, seal, dry, boom!

 

obviously there is a shitload more to it, but you need to be a little more specific and hella lot less lazy and start searching through the millions of threads about porting.

Someone has a good link to a ported box building site...I'll try to find it.