3.75 cubes @ 30 HZ pilgrim build

[djdilliodon!]

Can you build this sub in a 12”?

Yep. Can do it for 1000w rms, 1500w rms, or 2000+ rms. Can do to work sealed, ported or both. 25mm of xmax to 33mm on that style.

 

[SlugButter]

So I guess she is doing well ported . The high temp coating is what you are most likely smelling. They have a smell with no power to them. We gotta get you into a 8 layer aluminum flat wire build next, send it 2500 rms and it’s instant hearing loss lol.

It’s doing very well ported. Im liking it a lot. I will likely need a high output alt for 2500 watts. Might do that this summer.

 

[djdilliodon!]

It’s doing very well ported. Im liking it a lot. I will likely need a high output alt for 2500 watts. Might do that this summer.

I’d say you definitely would need one. I have one being built now for my car cause the stock 95 amp isn’t enough lol. It did ok on 1200 watts but still would get a little light dimming. On what I’m looking to run it’s not even gonna be close.

 

[SlugButter]

I’d say you definitely would need one. I have one being built now for my car cause the stock 95 amp isn’t enough lol. It did ok on 1200 watts but still would get a little light dimming. On what I’m looking to run it’s not even gonna be close.

Yeah. I put in a second battery but I’m still getting voltage drops and some dimming. My alternator is a pain to access so I’ve been putting that off.

 

[djdilliodon!]

Yeah. I put in a second battery but I’m still getting voltage drops and some dimming. My alternator is a pain to access so I’ve been putting that off.

That sucks, mine isn’t too bad at all. These days they cram everything in there put it at the bottom where a lift is a must. They fitting 10 pounds of ish in a 5 pound bag .

 

[SlugButter]

That *****, mine isn’t too bad at all. These days they cram everything in there put it at the bottom where a lift is a must. They fitting 10 pounds of ish in a 5 pound bag .

Mine requires the whole wheel well to be torn apart to even access it. The ac compressor is in the way coming up from the bottom.

 

[SlugButter]

Making some speaker protection today. Got busy and havent had time to do it. Just bought some 3/8 inch aluminum rod, drilled a 3/8 inch hole on a 2x4, then bent them to 90 degrees…..or close anyway.

 

[SlugButter]

 

[SlugButter]

 

[SlugButter]

waiting for paint to dry so I threw together a quick coffee table from some scrap wood for the TV room. The cheap walmart table broke this week.

 

[SlugButter]

Finished. Next time I will do 5 bars instead of 3 and use 1/2 inch instead of 3/8.

 

[djdilliodon!]

Finished. Next time I will do 5 bars instead of 3 and use 1/2 inch instead of 3/8.
View attachment 38736View attachment 38737View attachment 38738

I wanna do this on the subs in my car just incase someone gets in my car and rips the seat back they can’t hit the subs. I may even do it for the doors speakers as well. Looks like I’ll be taking measurements in the morning lol. I like the way it looks! You did an excellent job on that!