1500-2000rms 12 inch sub recommendations

Just minor mods and they fit perfect ..it really brings out the midbass... these are really nice sounding speakers and very well built they have cast baskets ..spring loaded speaker terminals and 3" voice coils ... I also have a set in my Steeda Focus ...and had a set in my Saleen Mustang but the tweeters were pressing out on the factory grills and I started noticing little cracks ...so I changed to a set of Pioneer Rev 6x8s ...
I might have to do that to mine soon for sure
 
How much do you want for it?
I'm selling it for $600 it's basically brand new . They do good SQ and SPL and I'd be able to help with box design ... but I'd want to deliver it because I dont trust shippers and would be willing to meet half way ... You wont regret this sub...and I can promise I'm loosing money on it . ..if you want you can PM me
Screenshot_20200809-210215_Drive.jpg
 
They're still building their higher end stuff in house. I've seen some redlines locally and they seemed pretty decent.
I knew the zs were still built in house ..I thought all the other subs went over seas .. back years ago I went to their office in OKC several times ..it was actually almost hidden ...but I got to tour the facility and really enjoyed the experience.
 
The box has not been made yet but it will be going in a single cab so the port could be pointed at the back of the cab or by the floorboard. But if there is a specific spot the port should be in I would be happy to hear it. My truck is the same body style as this pic so I figure it would turn out something like that
you got the right idea pointing back. That alone would give you massive amounts of output over your 10 sealed.
 
At least the original hand built like I have .. the newer chinese mass market DDs ..arnt worth a crap .
I thought all the other subs went over seas
Not true at all. There entire line in the thousands (1000, 2000, 3000, along with 1500-9500) is still done in house with the official made in USA tag (which is hard to get).

Steel, voice coil, spiders, cone, and terminals all sourced here.

There line in the hundreds (200-700) is made overseas but it's far from "ain't worth a crap"

They're still building their higher end stuff in house. I've seen some redlines locally and they seemed pretty decent.
Redline is literally better than any mid tier china brand (American bass, Soundqubed, entry level sundown).

Chinese junk subs don't use upgraded pole venting and USA sourced voice coils. There's a reason why the redline series is expensive both new and used, it's a solid product.

DD isn't going to ruin there 20+ year reputation by giving there vendors CT Sound/Skar level quality, lets be real here :ROFLMAO:
 
Not true at all. There entire line in the thousands (1000, 2000, 3000, along with 1500-9500) is still done in house with the official made in USA tag (which is hard to get).

Steel, voice coil, spiders, cone, and terminals all sourced here.

There line in the hundreds (200-700) is made overseas but it's far from "ain't worth a crap"

Redline is literally better than any mid tier china brand (American bass, Soundqubed, entry level sundown).

Chinese junk subs don't use upgraded pole venting and USA sourced voice coils. There's a reason why the redline series is expensive both new and used, it's a solid product.

DD isn't going to ruin there 20+ year reputation by giving there vendors CT Sound/Skar level quality, lets be real here :ROFLMAO:
I still have about 30 or so of the original DD subs ..I stocked up when I heard they were going to Chinese build houses ...I run original DD subs in over half my vehicles with decent systems
 
I am looking for a good 12 inch sub 1500-2000 rms for my center console. I currently have a skar sdr 10 which isn't enough for me. Amp is a wolfram c.2400 on stock 160 alt which would be upgraded. Battery is and XS power S3400 with big 3 upgrade. I mainly listen to country, rebassed country, and rap. Box would be ported and about 2-2.5 cut. Looking to spend less that $500 on a sub. Brands i am interested in are wolfram, deaf bonce, DC, skar, or anything that would be recommended.
This might work for you. Fi Q series. 1,750 rms. and 34mm xmaxx.
Screenshot_20200809-214940_Samsung Internet.jpg
Screenshot_20200809-214853_Samsung Internet.jpg
 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

This would go a long way to alleviating the dimming issue, up to around 4000 watts. It can handle 100A continuous and up to 285A 7 second burst...
6
259
Well, there is always a bypass that can be McGuyvered. So next time you want to tackle that task, post it. We can help.
9
582
All you need. I've been running these for years in 3 different vehicles. https://www.amazon.com/dp/B01BL57JO2/?tag=caraudiocom-20
2
591
I had two Skar amps (4ch & a monoblock) go bad within a year. Post #2 is an excellent recommendation.
6
811

About this thread

Wyatt.660r

CarAudio.com Newbie
Thread starter
Wyatt.660r
Joined
Location
Arkansas
Start date
Participants
Who Replied
Replies
44
Views
4,041
Last reply date
Last reply from
Louisiana_CRX
Screenshot 2024-03-07 184329.png

Doxquzme

    Mar 27, 2024
  • 0
  • 0
IMG_3075.jpeg

Daniel Lee

    Mar 27, 2024
  • 0
  • 0

Latest topics

Top