Wierd Speaker Problem

  • 3
    Participant count
  • Participant list

DJDroc22

Junior Member
Hey guys so i currently INSTALLED is my decent stock speakers hooked to an amp. I never had any issues and it sounds good. One morning going to work at 1/3 volume my amp shuts off and clicks into protection mode for like 5 secs and then returns on after i lower the volume. My left, front speaker went out. Or so i thought. I started playing with the fader and balance and found that if i drop my fronts i can crank my rear speakers just fine. So i figured my left, front speaker ceased up so i remove the panel to find out and the speaker moves freely and when i put volume to it i can faintly hear music. I ended up buying new speakersto replace but i dont want to install the new ones until i find the problem with the stock one. Cause if its wiring then i dont want to risk hurting the new system. Ive checked my connections at the amp and nothing is touching eachother. Any help would be awsome. Im trying to fix this over the weekand also.

 
just go ahead and replace the speakers. my guess is there is a scorch in the coil. It moves freely but when it hits a certain excursion point it shorts out.

 
Swap left and right channels and on the amp for the fronts and see if the same issue exists, if so, its the amp and not the speakers.

 
The scorch in the coil sounds exactly like the problem cause i figured the whole speaker would freeze up. But i didnt think to swap channels to test. So ill try that first just to make sure. Thank you fir the fast response!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

True but at those prices, nickel plated copper or brass would be a much better option for speakers, no point in using stainless steel at all...
24
340
dragon.breath, Many thanks for taking the time to help me out. It is very much appreciated and my small brain can understand it now. I have...
6
229
Drill a hole and use the proper protective split loom and hole grommets to keep the outer speaker jacket from knicks and cuts, give just enough...
8
760
I'd be willing to pay for a quality HU, if it meant that I can truly get the sound quality I need. I've seen some aftermarket ones that look...
10
780

About this thread

DJDroc22

Junior Member
Thread starter
DJDroc22
Joined
Location
United States
Start date
Participants
Who Replied
Replies
3
Views
919
Last reply date
Last reply from
DJDroc22
IMG_0925.jpeg

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0
IMG_0924.jpeg

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0

Latest topics

Top