- Nightshade 18'' with new aluminum pole w/ 4 spiders (2 soft, 2 hard)
- AQ2200
~4.5^3 @ 32hz (after displacements)
The desigin comes out to 5.5^3. With sub, port, and bracing I think it will be around 4.5.
The port may have to be resined up for extra strength since its weaker than aeros. How should I brace it? Ive never have done tube ports before, so I don't know how I should brace it and attach it to the box, etc. Any help on that would be very useful.
The tube is 8'' diameter and I'm cutting it to 24'' for 32Hz tuning. I was told this will take up about .5 cubes? Its 48'' long so I have plenty to work with.
I don't know how to do the math, but how much depth for the sub will I have with that box design? Since I have the aluminum pole I dont need to have space for the pole to vent (thanks jbizzle)
- AQ2200
~4.5^3 @ 32hz (after displacements)
The desigin comes out to 5.5^3. With sub, port, and bracing I think it will be around 4.5.
The port may have to be resined up for extra strength since its weaker than aeros. How should I brace it? Ive never have done tube ports before, so I don't know how I should brace it and attach it to the box, etc. Any help on that would be very useful.
The tube is 8'' diameter and I'm cutting it to 24'' for 32Hz tuning. I was told this will take up about .5 cubes? Its 48'' long so I have plenty to work with.
I don't know how to do the math, but how much depth for the sub will I have with that box design? Since I have the aluminum pole I dont need to have space for the pole to vent (thanks jbizzle)