Sub positioning in jeep?!?!?!

[hispls 5,000+ posts]

If you're looking to meter, I'd suggest porting out the side. Lay down the back seats and you'll have a lot of flexibility to rotate the box to point the port in whatever direction is best on the meter. My Jeep Grand Cherokee's meter best with port into passenger side corner.

 

[BoomBoxStereo 10+ year member]

If you're looking to meter, I'd suggest porting out the side. Lay down the back seats and you'll have a lot of flexibility to rotate the box to point the port in whatever direction is best on the meter. My Jeep Grand Cherokee's meter best with port into passenger side corner.

Port out to the side for sure //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I did a lot of on position tests with my current box (sub up, port up... Again in a 2007 jeep liberty), and best on the meter was sub up port up believe it or not

 

[sweety 10+ year member]

Don't mean to hi-jack the thread:emb: but was wondering if sub back & port up would give a good output ? just i'm going to get my box built at long last but don't have room to run the sub up as I need as much load space as poss in my Nissan R20 SUV,