sub placement help for bass??

  • 5
    Participant count
  • Participant list

Mr. Loki
5,000+ posts

Banned
6,080
0
Missouri
Ok here is the run down......I have a bandpass box made of 3/4mdf with plexiglass viewing windows the subs are facing the windows so you can see them hit...I need to know which way I should point them to get the most bass? Point them to the front? To the back? etc.....please help.

 
well for that i dont really have an answer since i dotn really recomend a bandpass box unless it is built specificly for a sub due to its poor freq. response.......but my advise would be to get a sealed or ported....but since thats probably not an option...just try moving it around to see which way gives you the most bass....every car is diff.....so see what works for you

 
We can't tell ya man. You have to try it both ways and see. I will say, that usually firing towards the rear is louder . But not always //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Originally posted by Goddyd4me jus try it either way

We must have some kind of telekenesis (sp) or something. We have been posting pretty much the same thing at the same time alot here lately //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Hey, great minds think alike! Right?

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
well.....its been tried both ways now and with the subs facing the back and the ports facing the driver it sounds the best....major bass and pretty good clear sound at high volumes.....

 
No I dont wonder why, because the trunk acts as an enclosure, but still they dont sound bad at medium levels with the trunk open.....

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
228
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
553
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
12
583

About this thread

Mr. Loki

5,000+ posts
Banned
Thread starter
Mr. Loki
Joined
Location
Missouri
Start date
Participants
Who Replied
Replies
11
Views
559
Last reply date
Last reply from
Mr. Loki
445981256_3731324230470906_9081536917273579948_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0
445387485_1610561083127261_6762343569694877677_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0

New threads

Top