What I find quite astonishing is the contrast between these two 15 year olds on this thread.If I was you,, ( Im 15 too lol ) I would talk to the builders of that box and try to get the box built with 10" inch holes for Subs.
http://www.mach5audio.com/index-2.html
Purchase ( 2 ) of the 10" Mach 5 MAW's for $43.06 each. They only call for .5 cubes sealed, after displacement of the sub you will have about .60 for each sub which should be fine.
Make sure that the box has 5 1/2" of mounting depth....although the MAW 10 only has a mount depth of 5" it also has vented poles which needs .5 extra inches of mount depth so consider its mounting depth 5 1/2 //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif
For amp
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16338
Wire the 2 MAW's in parallel to give the subs a 1 ohm load. The amp will feed the subs 750 watts......Set the gains to around 500 watts which is the combined RMS for these subs.
Wiring
http://www.knukonceptz.com/productDetail.cfm?prodID=KOL-AK4
43 bucks and will only need an extra wire to run from HU to amp ( Remote wire ) isnt listed on site so I geuss it doesnt send it ? ( Havent worked with Knu )
Im at $316 WITHOUT shipping of subs and amp kit.......buy a set of components maybe?
//content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif I started this at like 4:15 and got busy with homework and other things lol
Hope I was some help //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif
Iv got sumtin for ya....why dont you shuv a canadian ***** up your *** and go listen to your awsome subs that you spent way to much money on and FVCK OFF!!!!!!What I find quite astonishing is the contrast between these two 15 year olds on this thread.
I mean here^ you have one guy that "did his homework", apparently reasearched enough and has a well defined plan. What's funny is this guy mentioned actually doing real homework as well //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I guess it's not the 15 year olds with "systems" that give car audio a bad name, it's just the ones that don't really think about it beyond "I need bass" lol.
On the other hand we have the other guy that seems to have nothing more than an ill-defined plan, pretty much jumping from one product to the next as each person recommends something different, not really knowing what they really want at all. Thinks factory speakers are fine and "just wants bass" apparently nullifying the need to do something like get a proper front stage. //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif I dunno about you guys but I find this rather amusing.
Blove1991 is perhaps the guy that many local shops hate because he's thought everything through, knows what he's doing and is going to end up with something that is likely going to sound pretty darn good for the money he spends. The other guy is the type of person local shops love. Kid comes in and they just tell him whatever and he nods and listens. Tell him stuff like the brands they sell are the shiznit and other brands he mentions "****", etc. Then give him some way inflated price on lacklustre gear and he pays it and ends up with something that sounds pretty bad and pays tons of money for it with the guy at the shop laughing all the way to the bank.
I understand the OP is trying but I wonder if he's really trying hard enough. He doesn't sound like the guy that's actually doing real homework, nevermind the apparent lack of homework on a "system" he's trying to build.
It's fine to ask questions and listen to what people have to say and try to gain some knowledge on the subject; but it's another thing to ask questions and refuse to listen to the answers if they aren't what you want to hear. What's funny is just reading back through the thread it seems someone (XsabesX) already said the same thing...
That sounds like a good deal....except its a mono amp....which i think i would need a 2 channel for 2 kickers.....Is this a good Package????2 of these - http://www.millionbuy.com/kik05c124.html
powered by this - http://www.millionbuy.com/prfap1000m.html
with this wiring - http://www.millionbuy.com/kik05ck4.html
thats $249.80 shipped cause of free shipping over $200.
so that leaves you with $150.20 to get a box for em, the perfect setup for YOU
Don't worry no offence taken as this is completely expected from a 15 year old like yourself. A 15 year old like the other guy on the other hand, well I'm sure he's much more of a person than you and wouldn't result to profanity, insults and the like.Iv got sumtin for ya....why dont you shuv a canadian ***** up your *** and go listen to your awsome subs that you spent way to much money on and FVCK OFF!!!!!!
This is not the way to endear yourself to the forum.Iv got sumtin for ya....why dont you shuv a canadian ***** up your *** and go listen to your awsome subs that you spent way to much money on and FVCK OFF!!!!!!
True, but neither was this:This is not the way to endear yourself to the forum.
2 - MA Audio 12" MA120QS 300RMS 600W Peak1 - Power Acoustik LT980/2 980 watts 2 channel 220 X 2 at 4ohms
1 - 4 gauge Amp kit
1 - MA Audio 2 Farad Capacitor
1 - Custom Chevy Silverado Box (Under Rear Seat) (PICS POSTED)
TELL ME WHAT YOU THINK....
ANY SUGGESTIONS ON WIRING, OR IF I SHOULD USE A CAP OR NOT!!
THANKS!!!!!!