My 07 build, enjoy :D

[SPL140.2 5,000+ posts]

Do u plan on sticking with the HD3s?Have u got a chance to play with the HDC3?

Yes I plan on sticking with the AQ HD3's the woofers are all updated, pics will come of that soon to. No I havnt had the oppurtunity to play with those yet but soon im sure //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

egg

 

[SPL140.2 5,000+ posts]

the negative camber isnt what kills tires, its the tow angle..the handling advantage you get from lowering the car is mostly in the fact that the negative camber allows for a greater contact patch when cornering..when you take the camber out, it defeats the purpose of dropping it imo. ive got the front and rear kit on my teg, but solely for adjustment at the track..id rather buy some 18" tires a few thousand miles earlier than have my car handle like shit for all of the tires life.

you have to understand this is a daily car not just a comp car or a racer. Up here the road are sheahty, when I purchased the car it was slammed and i bottomed out pulling in my own driveway not to mention on the roads, so I raised it up some and installed the camber kit. Plus my car only has the D15B6 motor which isnt very fast, my lawnmower is faster lol but it gets great gas milage //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

egg

 

[SPL140.2 5,000+ posts]

got some time between cutting decals so heres some more //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[SPL140.2 5,000+ posts]

4-30-07

cut the center tube to 7.5" long with the flares it totals 13.5" long tuned to ??hz. Got the port on the tube taped it up to secure them for now. This length gives me 2.5" of space between the back wall to the port, looking to get 4" but im gonna test this first than start cutting

heres some pics

 

[SPL140.2 5,000+ posts]

4-30-07

got the other port in, im gonna take the day off of work *cough* lol hook up the amps and throw a tone on it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif





heres a shot from the front of the car

 

[SPL140.2 5,000+ posts]

5-01-07

tested it more cut the port a tad now its on ??hz but the port still needs to be cut one more time just to make sure. BTW, this is on one amp wired to 1.5 ohms //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif still looking for a 50+ with one amp.

heres some results







CD PLAYER IS SKIPPING, PAST 146.5DB??? ITS NEVER DONE THAT BEFORE //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif NOW I HAVE TO FIGURE OUT WHY THE HECK ITS DOING THAT.

 

[SPL140.2 5,000+ posts]

got a few burps in of course with the fn skippin, Jermiah25 suggested the fusion deck it has a 40 sec of memory //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif So i may have to find one of those.

heres some of todays tests again 1.5ohm to one amp and not fine tuned in ill have more time this weekend to fine tune the amp settings, but i really cant get a good reading till the deck stops skippin. I have to get the tone up to ??hz also. Plus I calculated the cub ft of the tubes 1 is 1.5cubft and the other is 1.7cub ft. Way to big //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I may have to cut them down to 1.25 cube than 1 cube to see what they like.

 

[SPL140.2 5,000+ posts]

5-3-07

fed ex arrived today and brought me these //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif



my fusion deck should be here monday //content.invisioncic.com/y282845/emoticons/woot.gif.aaa6090e619a97b6090d16dd863c5a69.gif I guess im just gonna have to test the ports at 145db till the new deck gets here. I think saturday im gonna take the carpet off and cut them down to 1 cub ft a piece and test that.

 

[SPL140.2 5,000+ posts]

5-04-07

got the new rims on and balanced //content.invisioncic.com/y282845/emoticons/woot.gif.aaa6090e619a97b6090d16dd863c5a69.gif tomorrow im gonna start cutting the tube down //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I love the white on black.

 

[SPL140.2 5,000+ posts]

5-7-07

Woot got my fusion deck installed today and it is great dont skip at all, now for some testing //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[SPL140.2 5,000+ posts]

still alot more to come //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

egg

 

[80INCHES 5,000+ posts]

dude this build is going great

80

 

[Rattlebrain 10+ year member]

dude this build is going great

80

x2

Wish could see it in person.

 

[SPL140.2 5,000+ posts]

dude this build is going great

80

x2Wish could see it in person.

Do I get nominated for the 07 build of the year lol //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

egg

 

[Rattlebrain 10+ year member]

Do I get nominated for the 07 build of the year lol //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
egg

Sure, why the hell not. lol