Making my car loud

[pro-rabbit 5,000+ posts]

I think the BL, BTL, and DD3500 are a bit much when considering a budget build. All of those like good amounts of power.

 

[CHEMMINS 10+ year member]

For the price and box space avail......

http://www.caraudio.com/forums/car-audio-classifieds/496477-fs-monster-8-psi-reconed.html

 

[pro-rabbit 5,000+ posts]

That 8 would be sick..but the OP would not be happy with just that 8" sub.

 

[CHEMMINS 10+ year member]

That 8 would prolly have more output than most 10's or 12's.

 

[Sleeklsc 5,000+ posts]

If that sony h/u unit is a higher end model i'd stick with that. Then Get 2 sets of int speakers ( new or used), mtx 1501d (1500rms@2 ohm, 2000rms as low as .5ohm modded) used for $250 and then 3 dual 4ohm 12 or 15" subs of your choice. Wire them to .67ohms and be happy.

Buy used and you'll save alot and be alot louder then buying new obv..

so......

250 amp

70 on 2ga install kit

100-150 int speakers

300-350 on 3 subs

thats roughly 750..Find a local member willing to help and Throw him a bill or 2.

 

[CHEMMINS 10+ year member]

Then Get 2 sets of int speakers (used),

Wtf are those?

 

[Bumpin' Goalie 10+ year member]

I think the BL, BTL, and DD3500 are a bit much when considering a budget build. All of those like good amounts of power.

A BL and an AQ1200d would keep him around $500-$550 if bought brand new from the respective companies. Leaving $200+ for box materials, wire and accessories. More than doable. Hell, could even throw in a Shuriken battery and still be around his said budget.

I've done many budget builds, with many goals in mind //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[pro-rabbit 5,000+ posts]

If that sony h/u unit is a higher end model i'd stick with that. Then Get 2 sets of int speakers (used), mtx 1501d (1500rms@2 ohm, 2000rms as low as .5ohm modded) used for 250 and then 3 dual 12 or 15" 4 ohm subs of your choice. Wire them to .67ohms and be happy.

Nice amp, but I would not recommend that ohm load for daily on stock electrical.

 

[Sleeklsc 5,000+ posts]

Nice amp, but I would not recommend that ohm load for daily on stock electrical.

I had 1 hooked up to 3 12" r's and a fosgate 800.4 for int...Dimming lights but it was still loud as f.

 

[pro-rabbit 5,000+ posts]

A BL and an AQ1200d would keep him around $500-$550 if bought brand new from the respective companies. Leaving $200+ for box materials' date=' wire and accessories. More than doable. Hell, could even throw in a Shuriken battery and still be around his said budget.
I've done many budget builds, with many goals in mind //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/quote']

Not a bad option there. Just depends on what he wants. Single or dual 15/12 setup. The AQ is a good option for power though.

 

[Sleeklsc 5,000+ posts]

Wtf are those?

interiour

 

[pro-rabbit 5,000+ posts]

I had 1 hooked up to 3 12" r's and a fosgate 800.4 for int...Dimming lights but it was still loud as f.

As I said, not good on stock electrical.

 

[Sleeklsc 5,000+ posts]

Or he could get 2 more cvr's and get an amp that can actually power them.. That jl 500/1 wasnt powering them enough.

 

[BlactimusCrime 10+ year member]

(2) SA-12s on an AQ1200d

 

[Bumpin' Goalie 10+ year member]

Not a bad option there. Just depends on what he wants. Single or dual 15/12 setup. The AQ is a good option for power though.

When on a budget, I usually find it easier to go with a single driver. Depending on his desires and space limitations, a single 15" or 18" would be in the running.