few questions

[Bobby322 10+ year member]

Just wired to my single d2 sub to 2 ohm to each channel on each vc. the amp is an ap30001d and it says 1500w @ 1 ohm per channel, so any idea on what power i am seeing? Just got a volt meter and I stay in high 13s and low 14s. Also I think my settings might be off on the amp, this is what I have:

Gain - half

LPF - ~145

subsonic - off

Bass Boost Freq. - ~60Hz

Bass Boost - off

I have my bass on my HU to 0, and HPF is off and my box is 32Hz. So any idea on what my settings should be at? I tried setting them to my ear but im not sure what I should be looking for.

Click to read more...

 

[Bobby322 10+ year member]

up

 

[lol_j00_mad 10+ year member]

whatever the amp does at 2 ohms

 

[Bobby322 10+ year member]

only says 1500 @ 1 per channel.

 

[lol_j00_mad 10+ year member]

thats 3000w total at 1ohm....just found the specs....does 950x2 @ 2ohms...so you are pushin about 1800w...give or take

 

[lol_j00_mad 10+ year member]

you and all 15 of your active users are gonna help us all???

what a loser / spammer

 

[Bobby322 10+ year member]

thats 3000w total at 1ohm....just found the specs....does 950x2 @ 2ohms...so you are pushin about 1800w...give or take

Where did you find that it does 950 @ 2?

 

[lol_j00_mad 10+ year member]

somone posted a pic of the manual on another site...here ya go

http://i43.photobucket.com/albums/e371/Tatsamaru/IMG00214-20090223-1605.jpg

 

[Bobby322 10+ year member]

ohh thanks. Anyone know whats up with the settings?

 

[Jabbed]

Lmfao.... You wanna go check it out and say that?

Could an inactive site afford to giveaway a RD Audio D9

And look at you? i at least try to help the guy by giving him a place to actually GET an answer while you just come here to diss on ME not even answer the guys thread...

Loser...

 

[basscort2009 5,000+ posts]

bobby i dont think u wired ur subs to 2 ohm each channel. dual 2 ohm subs can wire to 1 or 4 ohm. u cant wire one dual 2 to 2 ohms. so each channel is seeing 1 or 4 ohms. did u wire them in series or parrallel

 

[basscort2009 5,000+ posts]

oh wow fail on my part, i forgot u have 1 sub not 2 lol. dont mind me i just woke up :/

 

[audioatg 10+ year member]

Lmfao.... You wanna go check it out and say that?Could an inactive site afford to giveaway a RD Audio D9

And look at you? i at least try to help the guy by giving him a place to actually GET an answer while you just come here to diss on ME not even answer the guys thread...

Loser...

Thats funny looked like he gave advice not once but twice. Even found the specs on the amp as well. What the OP was looking for. SOOO goodluck with your up and coming website

There you go boddy 1800 rms too. So if that amp is anything what ppl have been raving about. It should do your 15 quite nicely. Id keep. Work on your box and set your gains with your DMM.

 

[Bobby322 10+ year member]

Well 1800w is only a little over half of what the amp can do. But im impressed with only ~1800

 

[audioatg 10+ year member]

Well 1800w is only a little over half of what the amp can do. But im impressed with only ~1800

yeah but you got to think as well. Thats RMS. Each channel is 950 RMS. Not max so on peak notes you should see more. Even with your eletrical you have. Nothin below 12 volts. Id say you should see that and some.