beaver6713
CarAudio.com Newbie
Hello,I am new to the site, hope I can get some help as I have put a fair amount of money into my build, now need to tune it. I have the Kenwood DNX892 HU, Focal 6.5 inch fx series components front and rear doors, (2) 10" Image Dynamic subs in a ported box, JL Auido RD400/4 for the mids and tweeters, Rockford Fosgate Prime R2/1200/1 for the subs, subs are wired at 1 ohm.
With my HU set at flat I used the SMD DD-1 to set both amp gains. HU clips at 30 so I run it max 28.
My question is how and what to set the crossovers at?
The focals FS is 70. The following settings are in the HU itself, I have the amp crossovers bypassed as I have heard that you do not want to use both at the same time.
I currently have the HP set at 120HZ with a slope of 12db and the LP set at 100HZ with a slope of 12db.
Are these settings close to what they should be?
Thanks
With my HU set at flat I used the SMD DD-1 to set both amp gains. HU clips at 30 so I run it max 28.
My question is how and what to set the crossovers at?
The focals FS is 70. The following settings are in the HU itself, I have the amp crossovers bypassed as I have heard that you do not want to use both at the same time.
I currently have the HP set at 120HZ with a slope of 12db and the LP set at 100HZ with a slope of 12db.
Are these settings close to what they should be?
Thanks
Last edited: