Computer building, I am

[Buck 5,000+ posts]

Those holes were a ***** and a half, that drill bit was walking around like a madman. Dude idk what corsair did to this metal but it's like harder than car metal.

 

[LsGuy]

Lol spring loaded center punch, like 4%.

Thats soon many fans lol. My case is a full tower, I run 3 intake up front, 3 exhaust up for the aio, 1 exhaust on the back, one intake on the bottom, and then power supply us also setup for intake at the bottom power supply blows directly across the gpu pushing the hot air up and back to the exhausts. I never head a peep out of my power, and it's at ear level on my desk.

 

[Firewalker]

Thanks. I have a bunch of screws from an older computer I stole the CD/DVD drive out of

I have so many extra computer case screws, bolts and mounting washers that I now have them in multiple quart size bags,lol.

 

[Firewalker]

I have 3 120mm up top, 2 in front, 2 on bottom and then my H75 has one on each side of the radiator. Front ones push air in, same with bottom ones with the top pushing them out. The H75 is setup with the one pushing air through the radiator then the one after that pushes it out. All except the Corsairs are Purple LEDs, ICR the name on them but they were name brand from Newegg that a lot of people use. I have a nice cherry wood computer desk now and the left side has a tower cubbie in it so I have it sitting on 4 small pieces of wood that lift if up 2 inches off the inside of it and the back of it is fully cut out to allow airflow as well. It never gets hot even during the summer. Before it was just sitting on the carpet and had a similar setup. I don't hear mine at all either even with all those fans pushing all that air. Door is open of course otherwise that is just dumb!

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

I never thought drilling a computer case would make a drill bit smoke.

 

[Buck 5,000+ posts]

I never thought drilling a computer case would make a drill bit smoke.

Even when using oil