Build me a $2000 setup please. I am a noob!

[quote name='quackhead']@mercury
just my .02...
MSW | Car Audio Stereo, Car Subwoofers, Car Amplifiers and Speakers

Imagine I61-2V2 6.5" Component / Coaxial Speaker Set - 12v Electronics
The Home of the World's Finest Loudspeakers, and World Championship Car Audio Speaker Systems. - Stage II - Imagine

MSW | Car Audio Stereo, Car Subwoofers, Car Amplifiers and Speakers

MSW | Car Audio Stereo, Car Subwoofers, Car Amplifiers and Speakers

MSW | Car Audio Stereo, Car Subwoofers, Car Amplifiers and Speakers
Alpine Electronics of America, Inc.

MSW | Car Audio Stereo, Car Subwoofers, Car Amplifiers and Speakers (Matches Alpines' recommendations as well and good quality built for the $)

B Stock 80 Mil Sound Deadener by Audio Technix: Better than Dynamat

Est.$400 installed correctly.(incl. wiring, interfaces, etc.)

This is just a basic suggestion, a good system with emphasis on the following:
SQ, dynamic headroom ability,reliability, expandability and electrical system efficiency.
I know a 1000 watt sub stage may seem like a lot, but it is not really. It is much better to attenuate, if necessary, than wish you had more bottom end impact.[/QUOTE]
At the original threadstarter ^^^ this.
 
Headunit: Pioneer DEH-80PRS $350

Components: DB Drive S7 6C $300

Rear Fil: DB Drive S3 60 $80

Components and rear fill amp: DB Drive A5 90.4 $240

Sub: DB Drive K9 12D2 $310

Sub Amp: DB Drive A7 1100.1 $400

__________________________________________________

Total $1680

The remaining $320 for sound deadening and enclosure

 
or close to it .might wanna try to make some new friends on here quick !!!!

Sound like yall charge too much for a comp set, sub/box/amps install. $60 an hour is about all the market will stand around here. And there are 1 or 2 good installers in my area at that price and the rest are just crap shoots on whether it will turn out good or not. Install shops is where OP needs to really be diligent in researching...especially if you just walk in off the street with a arm load of stuff they can't sell you.

 
For reference, I want the best audio quality I can get at this price. Not those ****** inaccurate boomy bass systems.

I know nothing about car audio. I own a lot of home theater audio though. I own a civic, so I am guessing front only speakers right?

So I need a:

-headunit

-subwoofer(s?)

-amp for headunit?

-amp for sub?

-sound proof for car

Is this all I need?

Can you guys pick out a basic $2000 audio setup (including the cost of paying someone to do it for me, I have no clue) to give me an overview of EVERYTHING I should be buying, please help! thanks

Get a head unit that has the features you need (nav,bluetooth,ipod,ect) sound quality doesn't change much among the the head units unless your dropping $1k

Amp: Zed Leviathan III

Front Stage: CDT ES-62i

Sub: Ultra Audio LV10 (or 12")

Amp wire kit: Skok Industries 4awg w/fuse and RCA's

Sub enclosure: http://pwkdesigns.com/ or DC Creations //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Cascade for sound deadening. Rammat and Second Skin are good too.

 
Headunit: Pioneer DEH-80PRS $350Components: DB Drive S7 6C $300

Rear Fil: DB Drive S3 60 $80

Components and rear fill amp: DB Drive A5 90.4 $240

Sub: DB Drive K9 12D2 $310

Sub Amp: DB Drive A7 1100.1 $400

__________________________________________________

Total $1680

The remaining $320 for sound deadening and enclosure
Dammit, Boy...I don't know who u Db rep is, but that shit is outrageous.

 
Headunit: Pioneer DEH-80PRS $350Components: DB Drive S7 6C $300

Rear Fil: DB Drive S3 60 $80

Components and rear fill amp: DB Drive A5 90.4 $240

Sub: DB Drive K9 12D2 $310

Sub Amp: DB Drive A7 1100.1 $400

__________________________________________________

Total $1680

The remaining $320 for sound deadening and enclosure

Apparently you fail to read....either that or comprehend. He has 2k for gear and install. He cannot do the install himself.

 
Sound like yall charge too much for a comp set, sub/box/amps install. $60 an hour is about all the market will stand around here. And there are 1 or 2 good installers in my area at that price and the rest are just crap shoots on whether it will turn out good or not. Install shops is where OP needs to really be diligent in researching...especially if you just walk in off the street with a arm load of stuff they can't sell you.
60 an hour just to install the mat ,the 25 -60 for the deck install 30 per side for the comps,80 for the amp kit 1 run of 0 gauge ,250 + for a custom box ,so with this you could be in the $800-$900 area

 
Especially if you walk in with gear they have no idea about. They are gonna charge you even more for labor (not price...but they will add hrs not worked) cause usually they make the $$ off selling you gear at retail.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

mercury

Junior Member
Thread starter
mercury
Joined
Location
indy
Start date
Participants
Who Replied
Replies
49
Views
4,669
Last reply date
Last reply from
Flex68
IMG_20260515_202650612_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0
IMG_20260515_202732887_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0

New threads

Top