very easy, just find the wire you want to clamp and put the meter around it with the arrow pointing the direction the current is going
hardest part is going to be finding which specific thing is causing it. start by the battery to confirm the current draw is actually happening, then trace it back to the problem area. if you're lucky it'll be something simple like a light, if you're unlucky it'll be something hard like a bad component
hardest part is going to be finding which specific thing is causing it. start by the battery to confirm the current draw is actually happening, then trace it back to the problem area. if you're lucky it'll be something simple like a light, if you're unlucky it'll be something hard like a bad component