ultimate157
5,000+ posts
Engineering Student
Each one parallel to 1 ohm, then both parallel again to 0.5How do you get .5 ohms? and how would u know if the amp is .5 stable?
The amp's specs will tell you if its 0.5 stable.
Each one parallel to 1 ohm, then both parallel again to 0.5How do you get .5 ohms? and how would u know if the amp is .5 stable?
little less than 800, that amp is overrated, but its a good match.so i would wire those two subs to a 1ohm load? and that would be about 800 watts into each sub?
wire both of them in parallel (each sub to one ohm) you can't "tell", (correct me if i'm wrong) has to be a good 1 ohm stable amp, and just have REAL good electrical to back it up. and I wouldn't suggest running a daily setup at .5 ohmHow do you get .5 ohms? and how would u know if the amp is .5 stable?
those subs have been on sale for months. I'd also suggest the type r'slol yea i kinda just came across those and saw how cheap they were b/c theyre on sale so they caught my eye, i havent bought anything yet so im still open to new ideas...like.....how about this sub, i dont know if this brand is any good or nothttp://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=5749
Some amps are stable from the factory to 0.5, it'll say so on the spec sheet. Running a 1 ohm stable amp at 0.5 isn't recommended for anyone who doesn't know 100% what they're doing.wire both of them in parallel (each sub to one ohm) you can't "tell", (correct me if i'm wrong) has to be a good 1 ohm stable amp, and just have REAL good electrical to back it up. and I wouldn't suggest running a daily setup at .5 ohm
so connecting 4vc parallel to @1 omh gives you 0.5?^ true, but there aren't a lot of .5 ohm stable amps, and they aren't made for idiots !
can you stop talking honestly, read what you just said.so connecting 4vc to @1 omh gives you 0.5?
//content.invisioncic.com/y282845/emoticons/woot.gif.aaa6090e619a97b6090d16dd863c5a69.gifI'll be installing 2 DVC2 mags to 0.5 on my Lanzar 2000D for 2kw.
//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gifso connecting 4vc parallel to @1 omh gives you 0.5?
if i dont ask how will i know why?http://www.the12volt.com/caraudio/woofer_configurations.asp
for sub woofer wiring, stop asking questions PLEASE