i would be forced to invert that. that's just flat fvcking awesomeSundown Nightshade 8"
//content.invisioncic.com/y282845/emoticons/bowdown.gif.b85b23b82970bd22fb6b549c3392f016.gif
![]()
too bad it was a 10" model. He's looknig for an 8 but GODAM! that's ****knig impressive. 3000 RMS. 60lbs woffer! hot ****ing dog. My 15" t2 weighs at 64 lbs.....Sundown Nightshade 8"
//content.invisioncic.com/y282845/emoticons/bowdown.gif.b85b23b82970bd22fb6b549c3392f016.gif
![]()
Obviously you'll have to mount it from behind the baffle.
As he was saying, CHECK THE SOUNDSPLINTER FORUM...Check the soundsplinter forums.
Dawn if only your amp could do 300 watts @ 4ohm these would be bad az with that amp.http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=264-855I'm looking for a single 8" that can handle around 300 watts at 2 ohms (I have a 300 watt 2 ohm amp) i've been looking at the image dynamics id8 the ed8 and a few others what do you guys recommend? oh also didn't we use to get a deal on that ed 9kv.2 i remember it being like $50 or is that deal over now? I'll be running it in a .35 sealed box
Oh yeah, i'd rather not spend much over $100