2ohm bridged stable amp

[shore 10+ year member]

ZR360 is 2ohm bridged stable.Am I thinking right that I can run a DVC 4ohm down to 2ohm and run it bridged off the KickerZR360?

Click to read more...

 

[ultimate157 5,000+ posts]

That is correct.

 

[shore 10+ year member]

Thank you very much.

I figured it was but I got confused on the 2ohm bridged part.I was thinking that would run it down to 1 ohm.Apparently that would only happen with a DVC 2ohm in parallel.

 

[ultimate157 5,000+ posts]

Thank you very much.
I figured it was but I got confused on the 2ohm bridged part.I was thinking that would run it down to 1 ohm. Apparently that would only happen with a DVC 2ohm in parallel.

You are correct in thinking this. It is stable to 2 ohms bridged because each of the channels by themselves are stable to 1 ohm.

Most amps today are stable to 2 ohms stereo, so that means its only stable to 4 ohms bridged.

Hopefully this doesn't confuse you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

And yes, a DVC 2 ohm in parallel will yield a 1 ohm load.

 

[shore 10+ year member]

Cool, thx for the back-up.