scarface998
CarAudio.com Newbie
Good Morning everyone, I have a 2010 Lincoln MKX with the factory THX audio and factory amplifier. My front doors are factory component speakers and I am replacing them with Morel Tempo Ultra 572 component speakers. In the door, there are no factory crossovers, but I do believe that the amp is all amplifying individual speakers which would make them actively crossed over right? If thats the case, do i need to install the aftermarket crossovers from morel tempo? If i do install the crossovers, how should i wire them if ive got two sets of wires from the amplifier? Should i just wire the tweeter wires into the crossover and leave the woofers connected directly into the amp? I do know that the woofers do not have full range and neither do the tweeters because my factory woofer is blown but I still get all the high range from the tweeter and I can hear the difference on the non blown speaker. I don't know what the factory crossover is but Morel specs the crossovers with WF: 3200Hz 6dB TW: 3200Hz 6dB (±2dB). Do we just not connect the crossover?
What do you guys think I should do in this situation?
Thanks!
What do you guys think I should do in this situation?
Thanks!
Last edited: