1 15 Fi or 2 15 type r's??

[99grandprixGT 5,000+ posts]

run the 2k on the type Rs

 

[7ender 10+ year member]

run the 2k on the type Rs

this.

 

[mr_tigolbitties 10+ year member]

Think they will be placed in like an 03 Jeep Liberty Renegade or Sport.

 

[power-fanatic07 5,000+ posts]

depends if you want to spend the extra cash on amp/electrical.

IMO i would go with the btl

 

[-Leister- 10+ year member]

How much space do you even have to work with? If you have enough space for 5 cubes why not run an 18" BTL?

 

[mr_tigolbitties 10+ year member]

Type R's peak at 1000 though?? And that amp is capable of pushing well over 2000 at one ohm.. I'd be scared to cook them. Maybe the t1000 bd on 1 ohm they could still be getting 1200 or more just depends on voltage and such.. Like I said though I don't know much about the Type R's and know a lot of equipment is underrated

 

[hornedfrog1985 5,000+ posts]

I think if you are running 2x the power to the BTL then there shouldn't be that huge of a difference in spl. You will just save some space with the btl.

 

[99grandprixGT 5,000+ posts]

most here run 800 + to type Rs, i did 1k each to a pair of 12s and they took it. the 15s if i remember rated at 750 rms they should take 1k, just dont clip and set your gain correctly.

 

[BushJ311 5,000+ posts]

Type rs will take more then rated power. I would go that route.

 

[Alpine4life89 10+ year member]

Dude, one 15 doesn't even have the cone area of 2 12's. Get the two R 15's and give them 1000 watts each and they will destroy the BTL. Give them 1,500 if you want to.

 

[mr_tigolbitties 10+ year member]

So 2 4 ohm type r's on a t1000bd wired to one ohm in the correct box should be alright?

 

[99grandprixGT 5,000+ posts]

ya it should still do pretty good. you got room for 2 15s ported?

 

[x1le 10+ year member]

go with a bigger amp man, atleast 1500rms.

 

[mr_tigolbitties 10+ year member]

I'll just take the 2009 T1000-1bd. Birth sheets have shown it pushing out over 1300 at 1 ohm. Two Type R's with 4 ohm DVC's can be wired there. This way I save money on wiring and other electrical crap. 1500 just seems a bit too much. How big does the box need to be? We put one built to over 12 cubes in my brothers 93 Dodge Dakota so I think a Jeep Liberty should be alright for a box prob less then like 10 cubes?

 

[bass-aholic 10+ year member]

you still havent told us how much room you have to work with, thats pretty much the deciding factor.