Live activity Postings Gallery About Post areas Feedback Stats
-
-
I'd go with 29.5"w and a 3" pvc 13.5" long -
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.Greatly appreciated, off to Lowes!
-
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.Thx for quick response! Yes, .5" MDF, 35hz, single baffle and 3" PVC port. Height and Depth are locked at 6.5" & 13.5." Its being built for an...
-
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.Hey @shredder1, I'm finally getting around to building the box and realized the depth is off by 1.5." Can you confirm that if I do 6.5 (H), 30.5...
-
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.No, I don't have an equalizer. I started looking at building this, but I would prefer to have my slot port, not a fan of the PVC tube. Does it...
-
Build it almost like you were about to but 27"w and side port the enclosure off center and I think you should be able to mount the sub to...
-
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.Does it matter where the port is positioned on the right wall? Also, I noticed the depth/width is reversed in the sketchup, is that an issue?
-
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.Thanks for this and yes, I'm using 1/2" MDF since the Alpine is very light. I've never done a box with a round port, so this will definitely be...
-
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.The cut sheet shows the right vertical port wall is only 4.25" in depth, so that won't work since the driver needs at least 4.5". This is why I...
-
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.I probably put something in the calculator incorrectly..?
-
-
-
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.I just used what Alpine provided from the spec sheets, but maybe I listed something incorrectly? Vent area: 10"^; vent displacement 0.17^
-
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.It's going under the seats of my truck, max height is 7.25", depth is ~15".
-
Qbenjamin replied to the thread Featured Alpine Type S Enclosure Build.Due to the amount of time and effort, I'd rather spend 95% of my time researching and the other 5% creating the enclosure. Hoping to get this...
-
Need some assistance from the pros; I've done plenty of boxes in the past but never the actual design. I'm using the subbox pro website to create...
-
-
-
-
-
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
