Box design for 2 sa-12’s or 15’s

[Prestondrew40]

Looking for a design for 2 SA-12s or 15’s. Gonna order them Friday. Box parameters are 33w 24h 20w. Don’t have to be exactlly those measurements, can be a few inches bigger or smaller. I’m a broke high school student, so A free design would be better

Click to read more...

 

[Prestondrew40]

V1 SA’s not V2

 

[Prestondrew40]

Bump

 

[poolman966554]

have you checked sundowns website? they have free "suggested" box plans. maybe they will fit the bill

 

[Boomin_tahoe 5,000+ posts]

Gonna need more info than what you provided dude. The dim numbers you provided are about 9 cubes gross. So might be limited on space for the 15's depending upon cubes required but the 12's are doable. @shredder2 might help if you buy him lunch.

 

[Prestondrew40]

have you checked sundowns website? they have free "suggested" box plans. maybe they will fit the bill

Yeah they’re website won’t pull anything up for me when I click the designs

 

[Prestondrew40]

Gonna need more info than what you provided dude. The dim numbers you provided are about 9 cubes gross. So might be limited on space for the 15's depending upon cubes required but the 12's are doable. @shredder2 might help if you buy him lunch.

Wdym by more info? I already talked to shredder and he said he would pass on this one

 

[Jeffdachef 5,000+ posts]

download torres box calculator, play around till you find your airspace and tuning.

 

[Boomin_tahoe 5,000+ posts]

Wdym by more info? I already talked to shredder and he said he would pass on this one

Simple. The designer will need vehicle they're going into, max measurements to work with, even tho you said it doesn't have to be the dims you provided already, power using, tuning choice, etc. W/o any of those, they won't work with ya. Get on FB car audio groups for some designers.

 

[2RZ-FE 10+ year member]

There’s more to it then choosing your air space and tuning. You need to be sure the port is the right dimensions and your air velocity is right for your power. My enclosure turned out to be over a cubic foot bigger than recommended since I like to tune high for my music style. If I would’ve just went with recommended air space with a higher tuning it would be peaky

 

[Prestondrew40]

Simple. The designer will need vehicle they're going into, max measurements to work with, even tho you said it doesn't have to be the dims you provided already, power using, tuning choice, etc. W/o any of those, they won't work with ya. Get on FB car audio groups for some designers.

2005 Tacoma, the dimensions are the max, i have plenty of room to play around with. Power will be a 3k taramps. Tuning doesn’t matter but no higher than 35hz.

 

[IndySlim]

Looking for a design for 2 SA-12s or 15’s. Gonna order them Friday. Box parameters are 33w 24h 20w. Don’t have to be exactlly those measurements, can be a few inches bigger or smaller. I’m a broke high school student, so A free design would be better

I just bought a pair of SA's and a prefab box from Down4sound that's specifically built and tuned for the SA 12's

 

[IndySlim]

I just bought a pair of SA's and a prefab box from Down4sound that's specifically built and tuned for the SA 12's

Finally got my set up going here's what's actually in the trunk,doors and under the hood.
Oops! I moved this to the proper area