Hello all!
I have finally obtained all my products for my Audio setup. I realise it’s probably not perfect or the most expensive setup, nonetheless I need much help installing it. I have never done anything like car audio before and I have only been researching and trying to get my head around it for about a month.
I will put a picture of my wiring diagram which is still not complete. I have a few questions regarding it and I would love some help. I have labelled each part with a number and that number will have a link to the product with some basic info about it to make it easier for everyone to help me.
Q1. What fuse do I need on my power distribution block as I Haven’t bought that yet
Q2.When distributing the 4 gauge wire so I can power both amps, does it need to split to to 8 gauge or can I just chop the 4 gauge wire I have and use that
Q3. Where do i earth!?!
Q4. Can I use my OEM Speakers for the rear and hook them up to the amp
Q5. Am I missing anything?
1. Battery
2. Fuse
3. Head Unit: Sony XAV-AX5000
4. 4 Gauge Power Wire
5. 8 Gauge Power Wire (don’t currently have)
6. Amp 1: Sony XMN1004 (4 channel, 1000W Peak, 70 Watt RMS x 4 @ 4 Ohm, 85 Watt RMS x 4 @ 2 Ohm, 175 Watt RMS x 2 @ 4 Ohm bridged)
7. RCA ( I have 2x 5m cables)
8. R-S65C.2 (RMS 100, PEAK 300, 4 ohms)
9. Tweeters from the speaker pack ( R-S65C.2)
10. Cross over from the speaker pack ( R-S65C.2)
11. Speaker wire (5m worth)
12. Power distribution block (haven’t purchase yet)
13. Mono Amp: Sony XM-GS100
14. Subwoofer:Sony BOXGSW121D 12" DVC
15. Remote turn on wire (not sure what I need for this)
Thanks in advance guys!
I have finally obtained all my products for my Audio setup. I realise it’s probably not perfect or the most expensive setup, nonetheless I need much help installing it. I have never done anything like car audio before and I have only been researching and trying to get my head around it for about a month.
I will put a picture of my wiring diagram which is still not complete. I have a few questions regarding it and I would love some help. I have labelled each part with a number and that number will have a link to the product with some basic info about it to make it easier for everyone to help me.
Q1. What fuse do I need on my power distribution block as I Haven’t bought that yet
Q2.When distributing the 4 gauge wire so I can power both amps, does it need to split to to 8 gauge or can I just chop the 4 gauge wire I have and use that
Q3. Where do i earth!?!
Q4. Can I use my OEM Speakers for the rear and hook them up to the amp
Q5. Am I missing anything?
1. Battery
2. Fuse
3. Head Unit: Sony XAV-AX5000
4. 4 Gauge Power Wire
5. 8 Gauge Power Wire (don’t currently have)
6. Amp 1: Sony XMN1004 (4 channel, 1000W Peak, 70 Watt RMS x 4 @ 4 Ohm, 85 Watt RMS x 4 @ 2 Ohm, 175 Watt RMS x 2 @ 4 Ohm bridged)
7. RCA ( I have 2x 5m cables)
8. R-S65C.2 (RMS 100, PEAK 300, 4 ohms)
9. Tweeters from the speaker pack ( R-S65C.2)
10. Cross over from the speaker pack ( R-S65C.2)
11. Speaker wire (5m worth)
12. Power distribution block (haven’t purchase yet)
13. Mono Amp: Sony XM-GS100
14. Subwoofer:Sony BOXGSW121D 12" DVC
15. Remote turn on wire (not sure what I need for this)
Thanks in advance guys!