Which 10" Sub to buy?

[THATpurpleKUSH 5,000+ posts]

Update!
I blew my 10w3v2 w/2 bridged channels from my old ZX460 (Rated @ 180w total for the sub, but probably a tad over 200 watts) Blown coil(s)

No signs of distress before or after the failure. It was jamming well at about 2/3 of the maximum volume I run for 2 "normal" songs and most of a rather harsh (intentional distortion produced into the track) dubstep track.

I was worried about the foam surround and the coils were the link to break. (the spider, tinsel wire, and foam surround look practically new)

I have two 12w3v3 sitting under my work bench and have examined them closely. The seem to have a nicer system of tinsel wire strain relief, and cone connection method, but no other obvious power-handling upgrades.

Be vary careful with the power you send to your v3 if you get one.

You clipped it pretty badly if you blew it on that little of power.

 

[Louisiana_CRX 5,000+ posts]

You clipped it pretty badly if you blew it on that little of power.

lulz