what 12" sub works well in a small ported enclosure

[Ridinhi 5,000+ posts]

Need some low end for the back of my expedition...looking for a 12" that requires a small ported enclosure...

Click to read more...

 

[Ridinhi 5,000+ posts]

also,willing to go with a 10" sub

 

[fasfocus00 5,000+ posts]

I got a 12" TC9 w/PSI recone. D2 coil.

 

[Ridinhi 5,000+ posts]

I got a 12" TC9 w/PSI recone. D2 coil.

what size enclosure would it like? and power?

Been looking at the Dcon subs also

 

[fasfocus00 5,000+ posts]

Recently it was a Kicker ZX1000 in 1.8 cubes net with a 4" port. It jammed out.

 

[macsdad 10+ year member]

depends on the amount of power you plan to run. dc audio lvl 2 12 is rated at 600wrms, and can go in a box at 1.25cuft, the lvl's 3-900wrms and 4-1400wrms, call for 1.5cuft each. I have a lvl4 12 in 1.5 tuned at 32hrtz probably getting a little more that that 1400wrms, and I love it. Very musical, and can hit all the lows I like. All three of these mentioned, in the 10 inch version, can be put in 1cuft.

 

[mylows10 5,000+ posts]

Dc will be one of your best options

 

[Ridinhi 5,000+ posts]

depends on the amount of power you plan to run. dc audio lvl 2 12 is rated at 600wrms, and can go in a box at 1.25cuft, the lvl's 3-900wrms and 4-1400wrms, call for 1.5cuft each. I have a lvl4 12 in 1.5 tuned at 32hrtz probably getting a little more that that 1400wrms, and I love it. Very musical, and can hit all the lows I like. All three of these mentioned, in the 10 inch version, can be put in 1cuft.

cool, thanks for the info man

Dc will be one of your best options

seems so....I forgot I have a Jbl P1224 that I can seal in 1.5cubes. Deciding on that or either one of these DC subs.

 

[macsdad 10+ year member]

nothing against jbl, but if you could use the same space, ported, every day, all day. i had a mb quart pwe15 in 1.5 sealed. the lvl4, in the same 1.5, walks all over it.