What 10" sub with 5" or less mounting depth for 0.6 sealed enclusre?

[ScottGS400 10+ year member]

I'm looking at enclosures for my corvette and as an alternative to the JL stealthbox I'm thinking about buying this enclosure:

http://www.nationalcorvetteregistry.com/shop/index.php?action=item&id=65&prevaction=category&previd=19&prevstart=0

It says it has an internal volume of 0.6 cubic feet but only allows for subs with a mounting depth of 5" or less which significantly limits my choices. The sub will probably end up getting around 300 watts off the rear channels of a bridged Zed Draconia. Any suggestions for a sub that would do well in this enclosure or am I better off going with the Stealthbox?

Click to read more...

 

[Imtjnotu 5,000+ posts]

pioneer makes those short mounting depth subs...here ill link u

http://sonicelectronix.com/item_7684.html

 

[AudioXtremes 10+ year member]

Use a 3/4" spacer and use this sub. http://www.ascendantaudio.com/assassin10specs.html

 

[wilzyx 5,000+ posts]

here is the new slim tang band 10" sub

http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=264-862&CFID=7597491&CFTOKEN=49918070

 

[Hintzyboy 5,000+ posts]

Clarion has a new slim-mount sub out right now. They scored better than the Pioneer slim-mounts in Car Audio and Electronics Magazine.

 

[Hintzyboy 5,000+ posts]

Custom box fw though. Pre-fabs are the sux.

 

[SAG3 5,000+ posts]

Sealed is sealed.

 

[mr_imperial 10+ year member]

3/4 spacer and a rsd

 

[OneKrazyKeebler 10+ year member]

here is the new slim tang band 10" subhttp://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=264-862&CFID=7597491&CFTOKEN=49918070

I bet that thing is a SQ beast. 120rms. would only take a super small amp to push it too.

 

[Spooby 10+ year member]

Peerless XLS 10"

That is what was used in this 350z (0.4cubes sealed)

 

[john#21 10+ year member]

3/4 spacer and a rsd

rsd10 = 5.39 in mounting depth. You'd only need a 1/2 in spacer. They sound good in that size box with those watts also.

 

[Louisiana_CRX 5,000+ posts]

An RE Audio RE10 is 5" mounting depth and optimum sealed box is .5 cu. ft

 

[creyc 10+ year member]

I'm using two 12" Pioneer shallow mounts in my brothers truck, each in a .65 cube enclosure and they hit very well for a single cab truck! //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif And they can be picked up locally for near 100 bucks!

 

[jeremiah 10+ year member]

http://www.mach5audio.com/product_info.php?cPath=48&products_id=42&osCsid=b90ed49cb45659f176575d098b95d280

 

[dgr00s 10+ year member]

oz audio vector 10.3

http://ozaudio.com/pages/V10_3.html