using a capcitor does help..........

..because the lights are dimming?
are you slightly retarded? lol

But the lights don't need the extra current, the amps do therefore if you connect the cap to the lights, they will still dim because the lights draw the same current no matter what , when AMPS draw current the drop varies. Not the same with lights.

WB

 
Some one knows the importance of CAPS in amplifiers. Although rated in micro farads, They do the same thing 5 FARAD caps do.

WB
NO.

I just told you why the caps inside amps are small compared to audio caps.

Caps inside the amp are using HV so small current needs to pass through them to give the proper total output.

You audio cap is so large because the amp draws a lot of current at LV to convert into HV.

The output signal is floating around 105V at low current. Go and check with a multimeter.

You wanna keep going toe to toe with an EE?

Ron

 
But the lights don't need the extra current, the amps do therefore if you connect the cap to the lights, they will still dim because the lights draw the same current no matter what , when AMPS draw current the drop varies. Not the same with lights.
WB
you're an idiot //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif lol

 
WB, Claiming to actually HEAR an improvement by installing a cap is 100% psychoacoustics. There is no other explanation for that.
And this, is exactly what cap supporters need to realize and come to terms with. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
But the lights don't need the extra current, the amps do therefore if you connect the cap to the lights, they will still dim because the lights draw the same current no matter what , when AMPS draw current the drop varies. Not the same with lights.
WB
????????? WHAT!!

 
1231723601915.jpg


can we all hear it again?

 
i still don't believe you. you photoshoped those. plus, you didn't take a pic of any of the multiple caps needed to supply power to this system? shame on you

 
i still don't believe you. you photoshoped those. plus, you didn't take a pic of any of the multiple caps needed to supply power to this system? shame on you
crapacitors //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
must have photoshopped the stretch marks on the the bed sheet too
and the blue paint that came off the crate these were shipped in, which transfered onto the cardboard box as powder and is now on my sheet and clothes //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

wishbone

10+ year member
Member
Thread starter
wishbone
Joined
Location
NJ
Start date
Participants
Who Replied
Replies
327
Views
20,113
Last reply date
Last reply from
audioholic
1778578257023.png

Glen Rodgers

    May 12, 2026
  • 0
  • 0
Screenshot_20260511_212804_Amazon Shopping.jpg

Blackout67

    May 11, 2026
  • 0
  • 0

New threads

Top