Two American Bass amps what's the differance in them?

You're facts are made up bullshit.So you are telling me that my 4480 is only doing 1200-1300 watts because the fuse rating is only 120???

Don't make shit up as i have had my amp clamped doing 2300 watts at 1 ohm.

Everybody who sees my comment dont buy taramp amps because the fuse rating on them is the truth and not clamped specs.

If you believe there specs, then just pay NoLoud4U to clamp his left nut for 200$.
Are you serious? Do you even know how Brazilian amps do what they do? Do you know what comes out of the output side? Let's see this clamp test you did? Also show us this 144 you claim...

Btw yes that's what I'm telling you. It's the hard reality of current

 
Are you serious? Do you even know how Brazilian amps do what they do? Do you know what comes out of the output side? Let's see this clamp test you did? Also show us this 144 you claim... Btw yes that's what I'm telling you. It's the hard reality of current
I am not even gonna argue with you and the ignorant stuff you say.

Also i am not like most car audio enthusiasts here who take videos and pics of every moment i have so i can't show anything.

Just a little know to know fact for you, these hybrid amps were made close to the same concept as a Brazilian amp is made. Which they use small micro processors and resistors to produce more current then actually being input.

 
I am not even gonna argue with you and the ignorant stuff you say.
Also i am not like most car audio enthusiasts here who take videos and pics of every moment i have so i can't show anything.

Just a little know to know fact for you, these hybrid amps were made close to the same concept as a Brazilian amp is made. Which they use small micro processors and resistors to produce more current then actually being input.
Oh really? So the output section is more current than voltage? No it's not. If that was the case the amp would be half its size. But I'm sure you knew that didn't you... Dude you are dumb, you don't know ****, you have no idea what anything means.. You are blind to the facts just like most newbs.

 
Oh really? So the output section is more current than voltage? No it's not. If that was the case the amp would be half its size. But I'm sure you knew that didn't you... Dude you are dumb, you don't know ****, you have no idea what anything means.. You are blind to the facts just like most newbs.
Yup good thing you noticed.... Get it all out raging homo.

If you feel i am so wrong go complain of MAF or go start your own site full of NoLoud4U facts.

 
Yup good thing you noticed.... Get it all out raging homo.If you feel i am so wrong go complain of MAF or go start your own site full of NoLoud4U facts.
One day after you have actually done something worthwhile you will get it. Just like every newb. You are not the first and you won't be the last. Also if you knew what you where looking at you would be able to see what that amp can really do. You paid for a 1300 watt amp and that's whst you got. If it was a 2200 the 120.1 would not have been that much louder.

 
One day after you have actually done something worthwhile you will get it. Just like every newb. You are not the first and you won't be the last. Also if you knew what you where looking at you would be able to see what that amp can really do. You paid for a 1300 watt amp and that's whst you got. If it was a 2200 the 120.1 would not have been that much louder.
new vfl mini american bass amp test results - Car Audio Classifieds

 
So you are wired at .5 running 16v? Also did you notice the readings? Brazilian amps have more current than voltage. This does not.

So that test proved it is overrated. But I guess you already knew that didn't you. Also he said it was clamped up to clipping but never talked about a scope. So what do you think it's going to do in a daily setup on 12v power? 1300 watts

 
So you are wired at .5 running 16v? Also did you notice the readings? Brazilian amps have more current than voltage. This does not.
So that test proved it is overrated. But I guess you already knew that didn't you. Also he said it was clamped up to clipping but never talked about a scope. So what do you think it's going to do in a daily setup on 12v power? 1300 watts
2nd test is running at 14.6 voltage getting 1900+ watts on a "SINE WAVE".

Of course many with this amp probably wont be on a high output alt, but even then with how dynamic music is the output varies.

OF COURSE you knew that also right?

This test was done on a first release of the amp version. American bass has since worked a bit on the design and even casing has changed.

Running this with a very short line of 4 gauge will easily allow for more power or else the amp will clip.

 
2nd test is running at 14.6 voltage getting 1900+ watts on a "SINE WAVE".
Of course many with this amp probably wont be on a high output alt, but even then with how dynamic music is the output varies.

OF COURSE you knew that also right?

This test was done on a first release of the amp version. American bass has since worked a bit on the design and even casing has changed.

Running this with a very short line of 4 gauge will easily allow for more power or else the amp will clip.
Also some food for thought. If this amp was like the Brazilians it would have went up in smoke on 16v.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

negolien

CarAudio.com Elite
Thread starter
negolien
Joined
Location
Sacramento,CA
Start date
Participants
Who Replied
Replies
48
Views
7,247
Last reply date
Last reply from
bgowdy
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top