Two American Bass amps what's the differance in them?

[NASTY08IMPALA 5,000+ posts]

Or the BC2000

Yup ..ive only seen 1 vfl120.1 clamp over 2200rms and that was wired at .5 with little rise and charging system at 15.3 ..most do around 1700-1900

 

[erod856 10+ year member]

How bout the hd 3500 is it any good

 

[mylows10 5,000+ posts]

The 4480 is only a 1300 watt amp.

actually rated at 2200 rms not 1300 that's the 2680 that's 1300

 

[bgowdy 5,000+ posts]

No the 120.1 isnt near 3k the 150.1 barely does 3k and thats when ran at .5 and pray ur rise only goes to .8 or so..but yes id take the 120.1 over the hybrid..but id take at aq2200 over the 120 if ran at .5

really? maybe i got them confused. I thought the 120.1 was like 2800 or something like that

 

[LosIsATool 5,000+ posts]

actually rated at 2200 rms not 1300 that's the 2680 that's 1300

If you can't tell by the specs they are a bit overrated.

 

[LosIsATool 5,000+ posts]

This is the one I'm talking about. With the 4awg and 120 amp fuse. American Bass VFL44801D 4500W VFL Series Class D Mono Amplifier

 

[mylows10 5,000+ posts]

This is the one I'm talking about. With the 4awg and 120 amp fuse. American Bass VFL44801D 4500W VFL Series Class D Mono Amplifier

Yes I know what amp. They have been clamped over 2200 rms The micro processor allows the amp to make more power with less current The larger amps are much better yes. But these hybrid aren't no slouch amps either

 

[bgowdy 5,000+ posts]

This is the one I'm talking about. With the 4awg and 120 amp fuse. American Bass VFL44801D 4500W VFL Series Class D Mono Amplifier

i will say that fusing doesnt always prove the output though

 

[LosIsATool 5,000+ posts]

You are a dealer are you not? So you are telling me these magical amps that can make 100amps more power than they take in on cable that can only carry 150 amps of current are only $250? Magic SPL dust I guess. To bad a amp rated the same was way louder.

 

[LosIsATool 5,000+ posts]

I'm going to clamp my left nut and get 2200 watts out of my **** with 14v coming from my right nut. I'll charge $200 for it.

 

[bgowdy 5,000+ posts]

I'm going to clamp my left nut and get 2200 watts out of my **** with 14v coming from my right nut. I'll charge $200 for it.

$150 Shipped?

 

[negolien]

Going to be running at 1 ohm and looking for 2200 rms tops so..Lookin for links to some stats if anyone has them. Clamps, specs...

 

[LosIsATool 5,000+ posts]

$150 Shipped?

It's not a cookie cutter. $200 shipped!

 

[LosIsATool 5,000+ posts]

Going to be running at 1 ohm and looking for 2200 rms tops so..Lookin for links to some stats if anyone has them. Clamps, specs...

BC2000 or the AQ.

 

[los33 10+ year member]

You are a dealer are you not? So you are telling me these magical amps that can make 100amps more power than they take in on cable that can only carry 150 amps of current are only $250? Magic SPL dust I guess. To bad a amp rated the same was way louder.

You're facts are made up bullshit.

So you are telling me that my 4480 is only doing 1200-1300 watts because the fuse rating is only 120???

Don't make shit up as i have had my amp clamped doing 2300 watts at 1 ohm.

Everybody who sees my comment dont buy taramp amps because the fuse rating on them is the truth and not clamped specs.

If you believe there specs, then just pay NoLoud4U to clamp his left nut for 200$.