Tryin' for a larger/more efficient box... Help

[Slo_Ride 5,000+ posts]

wtf?

You're lameness is boring me.

 

[shredder1 10+ year member]

If you happen to have the t/s handy, send them to me and I'll run them through winisd to get the correct velocity for port area and best tuning for them, along with power being used. That is if they are true t/s. Of course real world in the vehicle dictates all but don't ever guess on the correct pa/tuning.
Sent from my SM-N920V using Tapatalk

Thanks again for the help, them plans look great... now time to quit vacillating and get busy... I'll be cutting my 45's with a cordless Skillsaw... Wish me LUCK!.. I'll update when done!

 

[shredder1 10+ year member]

Lets update... Done!.. Finally, in and playing! Sounds Great so far... Definitely some increase at 40+ hz and still goes low well... "tuned to 30 hz"... Seems to make more efficient use of what power I have available... Slams well but now seems to have a little more Spl at higher frequencies... Props to CSCstang for all the help... The original box was manufacturers spec and sounded great, and could really play low with an external port extension... "23 hz!"... but now with the 5 ft3 box and a 81 in2 port it almost goes as low... And is louder! I'm pretty happy... Thanks to all, especially CSCstang for all the advice and help. http://i.imgur.com/BgrwbZT.jpg ... http://i.imgur.com/ORgaMrJ.jpg ... http://i.imgur.com/QlDIVZ6.jpg