Sub Choice Help

[SilverSquared 10+ year member]

I have right now, 3 PBX dual 1 ohm 15s in my truck. I am thinking of removing them, and putting my back seat in again. However, I need some advice. I am going to run a dowfiring box under my seat. It will be between .9 and 1.0 cu.ft. per side. I will have a 7" mounting depth. What 12" subs work in these environments, and can satisfy my needs for bass? I had a probox downfire with 2-CVR-122s all parallel bridged to my 250 HCCA. Now I was thinking of going with 2 CVX-122s all parallel bridged to my 2100 HCCA. What are your opinions and what are some other choices I can think of? Remember, 7 inch mounting depth, and .9 to 1.0 cuft air space, sealed box.

Thanks!

Click to read more...

 

[iceteebone 5,000+ posts]

what do you have for power? not sure the specs of that amp off hand

i assume this is sealed? not really a fan of selling kickers but i never worked with these ones

 

[SilverSquared 10+ year member]

2100 HCCA is driving the sins out of my 3 PBX 15s, and they're wired to 1.5 ohm bridged. Its very well capable of driving what I need it to.

This is from page 16 in my cardomain link. This is what I will be replacing with my back seat, and 2-12s under it. LOL. The amp on the side is obviously my 2100.

 

[SilverSquared 10+ year member]

Any opinions on what will operate NICELY with a 7" mounting depth and right at 1 cubic foot of air space?

Last 5 years I havent messed with many brands. Mostly Kicker, JBL, and PowerBass.

 

[iceteebone 5,000+ posts]

i would help you if you were to answer the questions i provided

 

[SilverSquared 10+ year member]

3000 watts or better below 1 ohm.

 

[iceteebone 5,000+ posts]

if you are sealing them up, i wouldn't hesitate to run a pair of rl-p's. nopt sure on the mounting depth off hand on those. i think the avalanche's and BM's have shallow mounting depth's

 

[SilverSquared 10+ year member]

ANy specific site I can order them from?