Should I do 2 T2 12's or 2 T2 15's

if you want to use the same subs you got on the power you already have, we can design you a box. usually in a hatch back, it is subs up port back. and those subs, I would chose the DBdrive subs because they match the RMS of your T1500-1BD amp. and with those subs, a 4 cubed box with plenty port area would be good. If you wanted help building it I can help and I also have four 4foot sono tube, each 7inches in diameter. which would be perfect for the fifteens. Then later down the road you can get better subs and amp and still use the same box.

 
you are correct, it said like 1840 I think @1ohm but as far power efficiency goes its a lot better than my hifonics brz 1700 and earthquake Ph-D10000 I had running before, not both at same time though. but if you guys have suggestions on good amps for a guy tryin not to spend a fortune let me know.
That's surprising. I mean I know fosgate it higher quality than hifonics but I figured the new hifonics lines would be just as efficient if not more. But I agree, just run what u have. Big 3 upgrade with an extra batt and plenty of good grounding, I think u will be ok. Just don't get gain happy.

 
if you want to use the same subs you got on the power you already have, we can design you a box. usually in a hatch back, it is subs up port back. and those subs, I would chose the DBdrive subs because they match the RMS of your T1500-1BD amp. and with those subs, a 4 cubed box with plenty port area would be good. If you wanted help building it I can help and I also have four 4foot sono tube, each 7inches in diameter. which would be perfect for the fifteens. Then later down the road you can get better subs and amp and still use the same box.
I want to build a sealed box out of one of those tubes, or something similar. Would be dope.

 
I honestly didn't realize how much under-rated Fosgate amps were. A 1500 watt amp that puts out 1800? That's freakin awesome! IMO, the enclosure will probably decide the size speakers you should go with. The Power series sub don't require huge amounts of air space, but after displacements and port/ports, you may only have room for the 12's. Either way, you will be pleasantly surprised with the right box.

 
Last edited by a moderator:
I built a box that was about 4 cubes internal after port n all and I dont think it was that great, it was loud but not any louder than the P3's I had that were rated way less

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

rlambert02

10+ year member
Member
Thread starter
rlambert02
Joined
Location
PHX, AZ
Start date
Participants
Who Replied
Replies
21
Views
2,072
Last reply date
Last reply from
rlambert02
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top