It ***** Mark I know I still feel real down about it //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif . I am going out today to get another PC2150 for the front & make that BEOTCH fit //content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gifSorry about the amp Scott.Wish we could have gotten it figured out.
We were able to get the amps to stay on with the volume at a lower setting on the deck.I think 45 was the highest before the amp would protect.It was only the one amp though that would protect.
Jake I have a question for ya.When strapping those amps does the phase need to be adjusted on the slave amp?Or should all settings be at at 0?
Slave amp doesn't need any adjustment at all.Sorry about the amp Scott.Wish we could have gotten it figured out.
We were able to get the amps to stay on with the volume at a lower setting on the deck.I think 45 was the highest before the amp would protect.It was only the one amp though that would protect.
Jake I have a question for ya.When strapping those amps does the phase need to be adjusted on the slave amp?Or should all settings be at at 0?
that's what I thought the master controlled everything.Just trying to narrow it down.Slave amp doesn't need any adjustment at all.
1.3 total so 0.67 per amp... DCR roughly 0.46 each.I am only running the dual 2ohm 12's to a 1.3 ohm load with the 3 of them.