Running 1.5ohms on a 2ohm stable amp?

[thisistiny 10+ year member]

What could happen?

Just won't put out the proper wattage?

Am i ruining the amp?

Thanks for the help, guys.

Click to read more...

 

[BloodyGuts335i 10+ year member]

after rise you should be fine! probably a bit over 2 ohms!

 

[DarkScorpion 10+ year member]

after rise you should be fine! probably a bit over 2 ohms!

x2. The amp should be fine. If it has built-in protection circuitry, it should cut off when it get's too hot. If it doesn't have built-in protection, just keep an eye on the temp.

 

[thisistiny 10+ year member]

Cause i've noticed on certain songs, on a part where it should be constant bass, the bass level goes up n down. And it's somewhat noticeable. maybe it's my weak electrical then? (aka stock)

 

[BloodyGuts335i 10+ year member]

your amp is 500 watts?

 

[thisistiny 10+ year member]

your amp is 500 watts?

yes 500watts @ 2ohms //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

And my subs are wires to 1.5ohms.

 

[BloodyGuts335i 10+ year member]

your stock electrical shouldnt drop like that on 500 watts. do the big 3 atleast and start from there.. make sure you have real good ground and that everything is tight. play the music with the constant bass and put a dmm on your battery and see what type of voltage its operating on..