Rms watts

Yes 10 inch duals
then they will be wired to 1ohm. At least that is what they should be wired too. Should be a wonderful match with a little headroom depending on the amplifier.

When setting the gain on the amplifier set all EQ's to flat, no bass boost, no loudness, amps bass knob all the way up. Turn your head unit up to 3/4 volume on most head units and send a 40hz -15db signal to that sub amp. Set the gain so the output voltage on the terminals is at 31.62v. This will give you 1,000w @ 1 ohm with some wiggle room for more volume on the subs.
 
Activity
No one is currently typing a reply...

About this thread

bn1856

CarAudio.com Newbie
Thread starter
bn1856
Joined
Location
Pekin il
Start date
Participants
Who Replied
Replies
4
Views
1,349
Last reply date
Last reply from
ThxOne
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top