Phers1er's build log...

[jdc753 10+ year member]

That painting/polishing looks sweet keep up the good work.

 

[bdawson72 5,000+ posts]

How much did those hertz mids run ya?

 

[Phers1er 10+ year member]

How much did those hertz mids run ya?

I bought the comp set from 90accordman for $240

 

[stuckinok 5,000+ posts]

Very nice...

Builds like this are pure motivation for me to stop half assin shit.....lol

 

[Rashaddd 5,000+ posts]

Are you done making the rest of our setups look like retarded eight year olds did them?

 

[EGGmane 10+ year member]

Builds like this are pure motivation for me to stop half assin shit.....lol

I know //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Very nice work OP. You got some very nice stuff and a very impressive build so far. Can't wait to see the rest.

 

[Phers1er 10+ year member]

Thanks for the comments everyone! I haven't done much due to lack of funds/weather.

(I need a bunch of Braided Sleeving,heat shrink and other random stuff so I can start on the wiring and if it hasn't been 105 out its been raining like crazy).

Hopefully, I will be able to get some stuff done this weekend.

 

[JB513 10+ year member]

Looks awesome! Keep it up.

 

[boomzilla 10+ year member]

god **** thats a beautiful job on the basket, i wish i knew about recones just so i can paint mine lol

 

[KINGDELL91 10+ year member]

that amp rack is sick

 

[Orion Man 10+ year member]

Man your whole build is just sick. You have put so much time into making things look nice. I truly hope it sounds as good as you expect. Keep up the good work.

 

[Phers1er 10+ year member]

I removed all of my interior and old wiring today so I could start on the deadening. I finished 3 layers on the fire wall, floor pan and under the rear seats but the trunk and roof still need to be done. I also laid down some 1/2" foam(the same stuff I used on the doors). I made sure to test fit the carpet, seats and panels before I glued it down so I would know where to leave the foam out to avoid fitment problems (This is why it looks patchy).

I wasn't really happy with the way the foam turned out, but I'm sure it will do the job just fine.

my old wires. I plan to reuse most of the wiring with the exception of a few things.

fyi...The center chanel is from the previous system and will not be staying.

foam

prep

spray adhesive

The seat is back in because this is my daily driver and I will not have time to finish today.

 

[tez4life Premium Member]

Beautiful work so far, I wish I was that skilled and talented. Install looks great.

 

[Phers1er 10+ year member]

Thanks man^^^^

I ordered the techflex and heat shrink I needed to do the power wire today and figured while I was waiting I could figure out a better way to mount my fuse holder (It was mounted to the under hood fuse cover and was not very stable).

I had a scrap piece of aluminum laying around so I decided to use it to make a little shelf to hold it up.

It still needs some sanding/finishing work and haven't made brackets yet, but here's some pics just to give you the idea.

I haven't decided if I'm going to polish it, paint it black and only polish the bevels (like the subs)or brush the top/sides and polish the bevels.

any opinions???^^^

btw:I'm not sure if I'm going to use the old fuse holder yet thats why I made it a little bigger than I needed.

 

[dcole18 5,000+ posts]

i say paint the aluminum to match the baskets...

good job on the baskets/motors so far btw...