Out with the old in with the new.

[kramer_212 10+ year member]

oh yeah if anybody has the bass knob for those prime amps, shoot me a pm, i need one, but don't want to pay retail.

 

[kramer_212 10+ year member]

Update, got one of the t15001bdcps today.

[/img]

[/img]

 

[ItsAJeepThing 10+ year member]

what about the t3 audio t2000s?
and im going to build a different box and tune it differently, maybe put some type of quick connect/disconnects on the woofer wires so i can go from sq to spl, in under 10 minutes.

Why not just put a toggle switch in your dash (like your other knobs) for your sub amps so you can from spl to sq in one second lol

 

[kramer_212 10+ year member]

[/b]
Why not just put a toggle switch in your dash (like your other knobs) for your sub amps so you can from spl to sq in one second lol

I don't have the room for two woofer boxs lol, but if id did...hmmmmm

anyways got the t15001bdcp in, and this little thing is no joke.

[/img]

 

[TheUnderFighter 10+ year member]

You should sell the cap so you can put that money towards something useful! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[kramer_212 10+ year member]

oh, that cap has two giant holes in it, and the dig display doesn't work otherwise i would have, lol

notice the electrical tape.......it covers the holes.

 

[kramer_212 10+ year member]

Update, haven't had time to really work since its 30 degrees, and i usually work/have class during daylight, and i don't have room in my garage right now. so this is what i got.

Sold the IVA-D106 and the imprint processor, and all the accessorys.

deciding between two stereos

A. [urlRL]="AVH-P6300BT"]AVH-P6300BT[/u

if i get this im going to get the fosgate 3sixty.3 processor when she comes out.

b. this is what im probally going to get want it so bad.

DEX-P99RS - Reference Series CD Tuner with Digital DSP and USB Port with Digital Direct Signal Transmission | Pioneer Electronics USA

but for now while im getting some of the other stuff im going to be rolling with this

[/img]

[/img]

picked it up at walmart because the guy that owns a shop in town is a d bag and doesn't know sheet.

anyway it has a 3 band parametric eq, and its actually alot nicer than i expected, sounds pretty good.

one bad thing is that it only has two pre outs front and rear/woofer so i had to run some y adapters for my rear speakers, and use the rear out for my woofers.

 

[kramer_212 10+ year member]

also think im going to bust open the w7s instead of getting the btls.

reason: because of the roll over it has close to the same cone area as a 15, and it also has a higher x max.

since im so limited on space don't think that there is really a bigger woofer i can get with only 2k rms available per woofer.

 

[darkmetal]

I would go with W7 definitely it all looks good whats the reason you changing out the deck? Also very **** rock forge 1500d amp

 

[kramer_212 10+ year member]

the iva d106 had to much white noise for my tastes even this cheap jvc has little to none.

 

[Bettr n' Revrse 5,000+ posts]

How is the Rattle trap holding up?

 

[mylows10 5,000+ posts]

the w 7's aren't gonna hold 2k rms each ,look at the ascendant mayhems instead ,you won't regret it

 

[kramer_212 10+ year member]

How is the Rattle trap holding up?

this is my 3rd car using this in, and i always clean the surfaces really good.........as far as i can tell can't see a difference between this, and the dynamat i used.

never used a heat gun either.

 

[kramer_212 10+ year member]

the w 7's aren't gonna hold 2k rms each ,look at the ascendant mayhems instead ,you won't regret it

problem is that there is so much less cone area.

 

[The_Grimy_One 10+ year member]

Nice install, much much cleaner than mine. Lol.

How does the bass even get into the car? Looks like the subs have no where to breath...