Ordering Two '06 L7's Tomorrow, Need some advice on ported

ok ive been messing with WinISD but im a n00b to it. Ummm real quick are these the right parameters to my L7's?

parameters.jpg


 
Well are those the paramaters from kickers website? For final reccomendations, make the box as big as possible, at least 6ft each, get at least 125 inches of port area, and when you think youve braced it enough, add twice as much bracing. Tune from 32-36hz. Use a 7/64th drill bit, and 1 5/8 screws. Keep the screws away from corners a little, to reduce the risk of splitting.

 
i apoligize but could someone please double check my parameters I put in? I do not know for sure if they are all right. Thanks A LOT!!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
196
While most Asian and African markets will identify Honda's small hatchback as the Jazz model, most Western regions will know the same model as the...
2
148
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
505

About this thread

JakeM

10+ year member
Member
Thread starter
JakeM
Joined
Location
Houston
Start date
Participants
Who Replied
Replies
18
Views
1,205
Last reply date
Last reply from
JakeM
20240519_201344.jpg

audiobaun

    May 19, 2024
  • 0
  • 0
Screenshot_20240519-213549.png

1aespinoza

    May 19, 2024
  • 0
  • 0

New threads

Top